Loading ...
Loading ...
Loading ...
- 12 -
minutes. During this time key F and key C must flash at the same time. After ten minutes
the motor switches off and the LED of key F remains switched on with a fixed light until
the motor starts up again at the first speed after fifty minutes and keys F and C start to
flash again for ten minutes and so on. By pressing any key for the exclusion of the hood
light the hood will return immediately to its normal functioning (e.g. if key D is pressed
the “clean air” function is deactivated and the motor moves to the 2nd speed straight
away. By pressing key B the function is deactivated).
• Function Timer
(*) The “AUTOMATIC STOP TIMER” delays stopping of the hood, which will continue
functioning for 15 minutes at the operating speed set at the time this function is activated.
• Anti-grease:
- When the A key flashes with a 2 second frequency the anti-grease filters must be washed.
Once the clean filter has been put back one must reset the electronic memory by pressing
the A key for approximately 5 seconds until it stops flashing.
Loading ...
Loading ...
Loading ...