Loading ...
Loading ...
Loading ...
11
ENGLISH
Removing Soap Bottle from Storage (Fig. K)
Always completely empty the soap bottle
26
before storing.
1. Unlock the telescoping handle
16
, and slide the handle
upwards so you can access the soap bottle
26
.
2. To remove the soap bottle
26
from the built in storage
space in the pressure washer unit, grasp the soap
bottle
26
with one hand and pull it out and away from
the pressure washer unit.
3. To place the soap bottle
26
into its storage slot, press
the soap bottle
26
firmly into the storage slot until it
snaps into the built in storage space in the pressure
washer unit.
4. Ensure that soap bottle
26
is secured into the storage
position by gently tugging on the soap bottle
26
.
NOTE: The nozzles listed below might not be included with your
pressure washer but are available for purchase at an additionalcost.
Common Spray Nozzles Common Applications
15 ° Orange Nozzle For brick or masonry.
25 ° Green Nozzle For vinyl siding.
40° White Nozzle For automotive washing.
Black Turbo Nozzle For abrasive cleaning.
Attaching Nozzles (Fig.I)
DANGER: Risk of fluid injection. Do not direct
discharge stream toward persons, unprotected skin,
eyes or any pets or animals. Serious injury willoccur.
WARNING: Flying objects could cause risk of serious
injury. DO NOT attempt to change nozzles while
pressure washer is running. Turn pressure washer unit
OFF before changingnozzles.
1. To connect a nozzle to the spray wand
5
, pull the quick
connect collar
6
toward the spray wand and insert the
appropriatenozzle.
2. Release the quick connect collar to lock the nozzle inplace.
3. Give the nozzle a firm tug after the quick connect collar
has locked intoplace to ensure the nozzle is locked
intoplace.
Attaching Garden Hose (Fig.H)
NOTE: Before connecting the garden hose to the pressure
washer unit, run water through the garden hose for thirty
seconds to clear any debris from inside thegardenhose.
1. To connect a garden hose to the
pressurewasherunit
11
,place the end of the
gardenhose
30
inside the water intake
18
.
2. Securely tighten the garden hose byhand.
NOTE: Always disconnect the garden hose afterusage.
Attaching High Pressure Hose (Fig.A, G)
CAUTION: NEVER PULL WATER SUPPLY HOSE TO
MOVE pressure washer. This could damage hose and/
or pumpinlet.
This pressure washer has a hook and loop hose storage
strap
27
on the cage
15
of the pressure washer unit to
store the coiled high pressure hose
1
.
NOTE: Uncoil the high pressure hose
1
before installation to
preventkinks.
NOTE: Avoid cross threading when installing the hose. Cross
threading will causeleaks.
1. To connect the high pressure hose
1
to the spray
handle
7
, thread the hose collar
28
onto the inlet
coupler
29
.
2. To connect the high pressure hose to the pressure
washer unit
11
, thread the hose collar
28
onto the high
pressure water outlet
19
.
Attaching Spray Handle (Fig.F)
1. To connect the spray handle
7
to the spray wand
5
,
insert the end of the spray handle onto the end of the
spraywand.
2. Press in and turn the spray handle counterclockwise to
lock it into position.
To Attach the Suction Hose (Fig.J)
Use the suction hose to pull water from a bucket or other
fresh watersource.
NOTICE: Do not use to suction soap, chemicals, dirty
or corrosive liquids, such as window cleaner, plant food,
fertilizers or bleach. Do not use with saltwater.
NOTE: Avoid cross threading when installing the hose. Cross
threading will causeleaks.
1. To connect the suction hose
2
to the
pressurewasherunit
11
,thread the suction hose
collar
31
onto the water intake
18
.
2. Securely tighten the suction hose collar
31
byhand.
NOTE: Always disconnect the suction hose afterusage.
3. Place other end of suction hose, with the filter
4
on it,
into a container of fresh water or a fresh water source.
4. Adjust the float ball
3
on the suction hose so the filter
4
stays covered in theliquid.
5. Select the correct nozzle to be used. See Attaching
Nozzleschart
6. After the job being performed is complete, place the
suction hose into a container of clean water and draw the
clean water through the system torinse.
2. To store the telescoping handle
16
, press the handle
release button
17
and slide the telescoping handle
down and into the pressure washer body. You will hear an
auidible click when it snaps intoposition.
3. To move the pressure washer
11
, tilt the unit so the
transport wheels
21
are touching the ground and pull the
unit by the telescopinghandle.
Loading ...
Loading ...
Loading ...