Loading ...
Loading ...
Loading ...
ENGLISH
TROUBLESHOOTING | 13
3
The wire whip is not dishwasher
safe. Clean it thoroughly in hot, sudsy
water and rinse completely before
drying. Do not store the wire whip
on the shaft.
CARE AND CLEANING
TROUBLESHOOTING
If your Stand Mixer should malfunction or
fail to operate, please check the following:
1. The Stand Mixer may warm up during
use. Under heavy loads with extended
mixing time periods, you may not be
able to comfortably touch the top of
the unit. This is normal.
2. The Stand Mixer may emit a pungent
odor, especially when new. This is
common with electric motors.
3. If the flat beater hits the bowl, stop the
Stand Mixer. See the “Assembling the
Stand Mixer” section and adjust the
beater to bowl clearance.
4. If your Stand Mixer should malfunction
or fail to operate, please check the
following:
• Is the Stand Mixer plugged in?
• Is the fuse in the circuit to the Stand
Mixer in working order? If you have
a circuit breaker box, be sure the
circuit is closed.
• Turn off the Stand Mixer for
10-15 seconds, then turn it back
on. If the Stand Mixer still does not
start, allow it to cool for 30 minutes
before turning it back on.
Do not return the Stand Mixer to the
retailer; retailers do not provide service.
For additional assistance, contact Customer
Service at:
AU: 1800 990 990
NZ: 0800 881 200
Please have your product serial number
ready when calling.
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
W10868696D_v01.indd 13 10/6/16 9:53 AM
Loading ...
Loading ...
Loading ...