Loading ...
Loading ...
Loading ...
16
CARE AND CLEANING
Remove spills and any heavy soiling as soon as
possible. Regular cleaning will reduce the diculty
of major cleaning later.
Figure 11: Use cleaners with caution
Surface or Area Cleaning Recommendation
Aluminum and vinyl Using a soft cloth, clean with mild dish detergent and water. Rinse
with clean water, dry and polish with a soft, clean cloth.
Painted and plastic control knobs
Painted body parts
Painted decorative trims
Using a soft cloth, clean with mild dish detergent and water or a
50/50 solution of vinegar and water. Rinse with clean water, dry and
polish with a soft, clean cloth. Glass cleaners may be used, but do
not apply directly to surface; spray onto cloth and wipe.
Control panel Using a soft cloth, clean with mild dish detergent and water or a
50/50 solution of vinegar and water. Do not spray liquids directly on
the oven control and display area. Do not use large amounts of water
on the control panel - excess water on the control area may cause
damage to the appliance. Do not use other liquid cleaners, abrasive
cleaners, scouring pads, or paper towels - they will damage the fin-
ish.
Control knobs Using a soft cloth, clean with mild dish detergent and water or a
50/50 solution of vinegar and water. (Do not wash knobs in dish-
washer or allow to soak - doing so may result in damage to knob
parts.) Knobs must be removed from the knob shaft for cleaning. To
remove control knob: turn to the OFF position, grasp firmly, and pull
o the shaft. To replace knob: line up the OFF marking and push the
knob into place. See page 19 for further information about reinstall-
ing the control knobs.
IMPORTANT: the knob installed for the SIMMER TO BOIL element
and DUAL element must be reinstalled to their same respective knob
shafts. Placing either of the knobs onto a dierent shaft may result in
damage to the knob or shaft.
CAUTION
Before cleaning any part of the appliance, be sure
all controls are turned o and the appliance is
cool.
If ammonia or appliance cleaners are used, they
must be removed and the appliance must be
thoroughly rinsed before operating. Follow man-
ufacturer’s instructions and provide adequate
ventilation.
IMPORTANT
Do not wash the control knobs in the dishwasher
or allow to soak - doing so may damage knob
parts.
Loading ...
Loading ...
Loading ...