Loading ...
Loading ...
Loading ...
Installing your freezer CONT
5
ELECTRICAL REQUIREMENT
Make sure there is a suitable power Outlet (115 volts, 15 amps outlet) with proper grounding to power
the freezer.
Avoid the use of three plug adapters or cutting off the third grounding in order to accommodate a two
plug outlet. This is a dangerous practice since it provides no effective grounding for the freezer and
may result in shock hazard.
USE OF EXTENSION CORD
Avoid the use of an extension cord because of potential safety hazards under certain conditions. If it
is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounding
plug and a 3-slot outlet that will accept the plug. The marked rating of the extension cord must be
equal to or greater than the electrical rating of the appliance. DO NOT USE EXTENSION CORD
LONGER THAN 12 FT.
INSTALL LIMITATIONS
Do not install your freezer in any location not properly insulated or heated e.g. garage etc. Your
freezer was not designed to operate in temperature settings below 55˚ Fahrenheit.
Select a suitable location for the freezer on a hard even surface away from direct sunlight or heat
source e.g. radiators,
baseboard heaters, cooking appliances etc. Any floor unevenness should be
corrected.
ELECTRICAL REQUIREMENT - SHOCK HAZARD
WARNING
Loading ...
Loading ...
Loading ...