Loading ...
Loading ...
Loading ...
Freezer feature and Use CONT.
7
DEFROST DRAIN
Place a narrow defrost pan (not included) in front of the freezer, and then use the plastic scraper to
gently drain the water that has accumulated at the bottom of the freezer during deforsting into the
pan.
DOOR ALIGNMENT
1.Remove the top hinge cover using a flat head screw driver. Gently lift
from the rear of the hinge and slide forward.
2.Lossen the top hinge screws using a Phillips head screwdriver.
3.Adjust the door or put a spacer in between and then tighten the
screws.
4.Replace the top hinge cover by aligning the rear of the cover with the
rear of the hinge. Press firmly on the front of the cover until it snaps in
place.
NOTE
Monitor the defrost pan to avoid overflow.
When defrosting is complete, wipe the interior of the freezer with a soft cloth. Plug in power cord back
into the electrical outlet.
Reset the temperature control to the desired setting.
Return the food into the freezer.
DEFROSTING
For most efficient operation and minimum energy consumption, defrost whenever the frost becomes
1/4” thick. Never use a sharp or metallic instrument to remove the frost, as it may damage the cooling
coils.
(A punctured coil will void the warranty). Use only a plastic scraper. Do not use boiling water as it may
damage the unit.
Remove frozen food from the freezer and place it in a cooler to protect the
food.
Turn the temperature control to OFF position and unplug the unit. Defrosting usually takes a few
hours. To defrost faster keep the freezer door open.
LEVELING YOUR FREEZER
Your freezer has two leveling legs which are located in the front bottom corners of your freezer. After
properly placing your freezer in its final position, you can level your freezer.
Leveling legs can be adjusted by turning them counterclockwise to raise your freezer or by turning
them clockwise to lower your freezer. The freezer door will close easier when leveling legs are
extended.
Loading ...
Loading ...
Loading ...