Loading ...
Loading ...
Loading ...
en Faults and what to do about them
48
Grey residues on the
washing.
Soiling caused by ointments, grease
oroil.
Wash the laundry using the maximum-
detergent dosage and the maximump-
ermissible temperature – see thecare
label.
Programme termi-
nated unexpectedly.
Press the Start/Pause I button
elected accidentally.
Turn on the tap.
Drying result notsatis-
factory.
The laundry clings to the sides of the-
drum after being spun
Loosen up the laundry by hand; start
the drying programme.
Closed tap Turn on the tap
Selected drying time too short Select the drying time according to the
Load.
Maximum or minimum load not taken
into account
Once the programme has ended: adjust
the load quantity, select a suitable dry-
ing programme and restart.
Spinning during dry-
ing.
No fault "Thermo spin", which is for energy-effi-
cient drying, starts after a drying time of
approx. 10 minutes.
The fabric softener is
not completely flushed
in or too much water
remains in the com-
partment.
The fabric softener compartment insert
is not correctly attached or is blocked.
If necessary, clean the fabric softener
compartment insert and fit it correctly in
compartment.
The laundry is not
dried.
The tap is turned off. Turn on the tap.
The load is too large. Reduce the load size.
The drying time is too short. Select a suitable drying time.
No display on the dis-
play panel.
Power cut The programme continues when pow-
eris restored. If you wish to remove the-
laundry during a power cut, you must
first Drain out the water. Check
whether:– the plug is plugged into the
socketcorrectly.– the circuit breaker
(fuse) hastripped; if it has, call the after-
salesservice
The door cannot be
opened.
Rinse hold has been selected Select the programme p+0Empty
+Spin
and press the Start/Pause I button.
The programme is running or the dooris
locked for safety reasons
Wait until End appears on the display
panel.
Power cut. Unlock the door mechanically
Fault Possible cause Remedial Action
Loading ...
Loading ...
Loading ...