Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/54650945-vrm050517n/bg15.png)
Portable Air Conditioner | 21
Troubleshooting
Problem Cause Solution
The appliance does not
turn on
• Power supply is off
• It is not plugged properly into
the mains
• The internal safety device has
tripped
• Plug into the mains rmly
• Wait 30 minutes. If the problem persists,
contact your service center
The appliance works for a
short time only
• There are bends in the air
exhaust hose
• Something is preventing the air
from being discharged
• Position the air exhaust hose correctly,
keeping it as short and free of curves as
possible to avoid bottlenecks
• Check and remove any obstacles
obstructing air discharge
The appliance doesn’t cool
the room
• Windows, doors and/or curtains
open
• Close doors, windows and curtains,
bearing in mind the “tips for correct use”
given above
• There are heat sources in the
room (oven, hairdryer, etc)
• Move away the heat sources
• The air exhaust hose is detached
from the appliance
• Fit the air exhaust hose in the housing at
the back of the appliance
• The technical specication of the
appliance is not adequate for the
room in which it is located
During operation, there is
an unpleasant smell in the
room
• Air lter clogged • Clean the lter as described above
The appliance does not
operate for about three
minutes after restarting it
• The internal compressor safety
device prevents the appliance
from being restarted until three
minutes have elapsed
• This is normal.
The following message
appears on the display:
/ /
• The appliance has a self
diagnosis system to identify a
number of malfunctions
• See the SELF-DIAGNOSIS Chapter
Temperature of room 18℃-35℃ (64℉-95℉) (Cooling)
Temperature of room 10℃-25℃ (50℉-77℉) (Heating)
LIMIT CONDITIONS
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...