Loading ...
Loading ...
Loading ...
Portable Air Conditioner | 12
Operating Instructions
To cool and dehumidify the room, follow the settting below:
1. Press the
button a number of times until the symbol appears.
2. Select the target temperature 18
℃-32℃ (64℉-90℉) by pressing the or button
until the desired value is displayed.
3. Select the required fan speed by pressing the
button.
4. Fan speed can be selected in: High, Med, Low, Auto
High speed: for maximum fan power
Med speed: reduces noise levels but still maintains a good level of comfort
Low speed: for silent operation
Auto speed: the appliance automatically selects the most suitable fan speed based on the temperature
setting.
Tips:
The most suitable temperature for the room during the summer varies from 24℃ to 27℃ (75℉ to 81℉). You are
recommended, however, not to set the temperature much lower than the outdoor temperature.
COOL MODE
HEAT MODE *
“*” means only the heat pump model have this function.
To set this mode correctly:
1. Press the
button a number of times until the symbol appears.
2. Select the target temperature 13℃-27℃ (55℉-81℉) by pressing the
or button until the corresponding
value is displayed.
3. Select the required fan speed by pressing the
button.
4. Fan speed can be selected: High, Med, Low, Auto
5. Water removed from the air will be collected in the tank.
6. When the tank is full, the appliance shuts down and “
” (full tank) appears on the display. The tank cap must be
taken off. Empty all water and then put the cap back in place.
7. When the water tank has been emptied, the appliance will start up again.
NOTE:
- When operating in very cold rooms, the appliance defreezes automatically, momentarily interrupting normal
operation. “
” appears on the display.
- In this mode, you may have to wait for a few minutes before the appliance starts emitting hot air.
- In this mode, the fan may operate for a short period, even though the set temperature has already been reached.
Loading ...
Loading ...
Loading ...