Loading ...
Loading ...
Loading ...
To do a check of the right hand guard
• Make sure that the right hand guard does not have
damages such as cracks.
To do a check of the vibration damping system
1. Make sure that there are no cracks or deformation
on the vibration damping units.
2. Make sure that the vibration damping units are
correctly attached to the engine unit and handle unit.
Refer to
Product overview on page 2
for information
about where the vibration damping system is on your
product.
To do a check of the start/stop switch
1. Start the engine.
2. Press the start/stop switch down to the STOP
position. The engine must stop.
To do a check of the muffler
WARNING:
A used muffler/spark
arrester and spark arrester mounting
face may contain deposits of combustion
particles on the surfaces that may be
carcinogenic. To avoid skin contact and
inhalation of such particles when cleaning
and/or servicing the spark arrester, make
sure you always:
• wear gloves;
• clean and/or service in a well ventilated
area;
• do not use pressurized air to clean the
spark arrester screen;
• use a steel brush and brush away from
your body when cleaning the spark
arrester.
WARNING: Do not use a product if
the spark arrester mesh on the muffler is
missing or does not work correctly.
1. Examine the muffler for damages.
WARNING: Do not use the product
if the muffler is missing or damaged.
A muffler that is damaged or missing
increases the noise level and the risk
of fire. Return product to a Husqvarna
dealer/service station if the muffler is
damaged.
2. Make sure that the muffler is correctly attached to
the product.
Note: Do not remove the muffler from the product.
3. If your product has a special spark arrester mesh,
clean the spark arrester mesh weekly.
4. Replace a damaged spark arrester mesh.
CAUTION:
If the spark arrester mesh
is blocked the product becomes too hot
and this causes damage to the cylinder and
piston.
24 1270 - 010 - 25.09.2023
Loading ...
Loading ...
Loading ...