Loading ...
Loading ...
Loading ...
12
Once you have removed the blade you will be able to see the toothed wheels of the gear unit (Fig. 6). Make
sure that no dirt gets into the gear unit when you change the blade.
To assemble, proceed in reverse order.
When you fit the hedge cutter blade check the position of the pin for the eccentric connector (Fig. 6/Item 1).
Take the hedge cutter blade and slide the eccentric mount (Fig. 7/Item 1) into position so that the pin for the
eccentric connector and the eccentric mount fit together precisely when assembled. Slot the hedge cutter blade
onto the guide pins (Fig. 6/Item 2).
When you fit the grass cutter blade check the position of the pin for the eccentric connector (Fig. 6/Item 1)
again. Shift the eccentric mount (Fig. 8/Item 1) on the grass cutter blade to the left or the right to find the
position at which the pin for the eccentric connector (Fig. 6/Item 1) and the eccentric mount (Fig. 8/Item 1)
match up.
7. Cleaning, maintenance and ordering of spare parts
7.1 Cleaning
• Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the
equipment with a clean cloth or blow it with compressed air at low pressure.
• We recommend that you clean the equipment immediately after you use it.
• Clean the appliance regularly with a damp cloth and some soft soap. Do not use cleaning agents or solvents;
these may be aggressive to the plastic parts in the appliance. Ensure that no water can get into the interior of
the tool.
• The shears should be cleaned thoroughly every time before and after use. A few drops of oil (for example
sewing machine oil) applied to the blades improve the cutting performance. However, never apply grease to
the blades. To guarantee a constant exact cut it is necessary that grass residues and dirt is removed also
from the top and bottom blades.
Important.
Because of the risk of injury or damage to property, never clean the product with running water,
especially not with a pressure hose. Store the cordless shears in a dry and frost-free location. The
storage place must be inaccessible to children.
7.2 Servicing
• For good cutting performance the blades should always be sharp. They can therefore be resharpened with a
whetstone. In particular we recommend to remove notches and ridges which are produced on the blades by
stones or the like.
• There are no parts inside the equipment which require additional maintenance.
8. Disposal and recycling
The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this
packaging can be reused or recycled. The equipment and its accessories are made of various types of material,
such as metal and plastic. Defective components must be disposed of as special waste. Ask your dealer or your
local council.
Loading ...
Loading ...
Loading ...