SereneLife PSLGR14 Upgraded Version Handheld Hedge Trimmer Cordless Hedge Trimmer Push Grass Cutter Shears W/ 7.2V Rechargeable Batteries Electric Hedge Shrubber Trimmer Changeable Blades

User Manual - Page 12

For PSLGR14.

PDF File Manual, 16 pages, Read Online | Download pdf file

PSLGR14 photo
Loading ...
Loading ...
Loading ...
11
Connect the equipment to the charger (Figure 4).
Check that your mains voltage is the same as that marked on the rating plate of the battery charger. Plug the
battery charger in a socket-outlet. The red LED (Figure 4/Item 1) comes on to indicate that charging voltage
is available.
The battery pack is being charged. An empty battery pack requires a maximum charging period of 3 to 5
hours. The temperature of the battery pack may rise slightly during the charging operation. This is normal.
As soon as battery pack is fully charged, the red LED (Figure 4/Item 1) extinguishes.
If the battery pack fails to charge, please check
whether there is voltage at the socket-outlet
If you still fail to charge the battery pack, please return the complete tool together with the battery charger to our
Customer Service Center.
Timely recharging of the battery will help it serve you well for a long time. You must recharge the battery pack
when you notice that the power of the tool drops.
Never allow the battery pack to become fully discharged. This will cause it to develop a defect.
5.3 Adjusting the handle
The handle can be turned -90/-45/+45/+90 by pulling the lock (Fig. 3/Item 8) in the direction indicated by the
arrow. Take care to engage it correctly. The appliance can now be used, for example, as an edge trimmer.
6. Operation
The area to be cut must first be cleared of stones and other solid objects. The safety lock-off (Fig. 1/Item 2)
prevents the tool being started unintentionally. Activate the safety lock-off (Figure 1/Item 2) by pressing and
pressing the ON/OFF switch (Figure 1 Item 3) at the same time. To switch off the equipment, let go of the
ON/OFF switch (Figure 1 / Item 3).
6.1. Cutting grass
Allow the grass cutter to glide over the ground. The best cutting performance is achieved on dry lawns. When
you notice a drop in cutting performance, recharge at once so that the batteries do not become fully discharged.
The blades must be kept in the black guard hood when the grass cutter is not in use.
6.2. Cutting hedges
The equipment can be used to cut small hedges and bushes.
Hold the shrub shears slightly tilted in the direction of the hedge you wish to cut.
Start by cutting the sides of the hedge working from the bottom up, and finally cut the top of the hedge. Make
sure that there are no foreign bodies in or alongside the hedge, which could damage the blades.
When to cut hedges:
As a general rule: hedges which loose their leaves in the autumn should be cut in June and October.
Evergreen hedges can be cut in April and August.
6.3. Changing the blades Important. Risk of injury!
To remove the blades, raise the lug (Fig. 5/Item 1) and push off the cover (Fig. 5/Item 2) in direction of the
arrow.
Loading ...
Loading ...
Loading ...