Loading ...
Loading ...
Loading ...
9
1. Turn 'ON' the power at the mains supply, the green neon will illuminate.
2. Turn the thermostat control knob to the desired temperature. When the amber neon goes out, the
desired temperature has been reached and the griddle is ready for use.
NOTE: Turning the control to a higher setting than required will not shorten the heat up time.
3. To turn 'OFF' the griddle, turn the thermostat control knob to the lowest setting and turn 'OFF' the
mains power to the griddle.
4. Both the amber and green neons should not be illuminated.
The oven is fitted with top and bottom elements. The thermostat maintains the overall oven
temperature. The top element is further controlled by the oven top heat control. Convection ovens
(GP8910E / EC) are fitted with a circulation fan.
NOTE: The Thermostat on the oven provides overall control of the temperature within the oven by
controlling both elements, where as the Oven Top Heat Control provides a means of
balancing the distribution of heat between the top and bottom of the oven.
Place oven racks in desired position.
Preheat:
Preheat the oven by selecting the desired temperature, and turning the oven top heat control (Refer
to Fig 5 on the previous page) to a maximum of 2. When the desired temperature is reached, the
amber neon will go out.
Cooking:
When the desired temperature has been reached, load the oven with product and set the oven top
heat control to the desired setting.
NOTE: When the oven top heat control is set to a high setting, proportionally more heat is
produced at the top of the oven. (This can be used for browning, etc, during the cooking
operation). With the oven top heat control set on a low setting, less heat is produced from
the top oven elements. (This mode is used for general baking purposes to prevent cakes,
etc, from getting too brown and crisp on the top, but allow the cake to cook through).
To obtain more top heat during cooking, turn the oven top heat control to a higher position. (The
higher the setting, the more top heat).
Turning ‘OFF’ the Oven:
a. Turn the oven top heat control to the ‘O’ off position. The top heating will be turned ‘OFF’ and
the upper heating indicator lamp (Amber) will extinguish.
b. Turn the thermostat control knob to the ‘O’ off position and the lower heating indicator lamp
(Amber) will extinguish. The oven is now turned ‘OFF’.
! IMPORTANT
DO NOT USE aluminium foil or trays directly on the cast iron sole plate(s).
NEVER block or cover the openings on each side of the sole plate(s).
! IMPORTANT
DO NOT USE aluminium foil or trays directly on the cast iron sole plate(s).
NEVER block or cover the openings on each side of the sole plate(s).
Loading ...
Loading ...
Loading ...