Loading ...
Loading ...
Loading ...
12
NOTE: Only non-combustible materials can be used in close proximity to this appliance.
* Side clearances can be 50mm when adjacent surface is at least 100mm below cooking surface.
NOTE:
All Models are delivered completely assembled. No further assembly is required, with
exception of all Leg Stand Models (G514-LS, G516-LS G518-LS), these will require
assembly. Refer to information below for assembly instructions.
This appliance is fitted with adjustable feet to enable appliance to be positioned securely
and level. This should be carried out on completion of gas connection. Refer to ‘Gas
Connection’ section.
Optional Accessories (Refer to the 'Replacement Parts List' at rear of this manual)
Plinth Kit. For installation details, refer to instructions supplied with each kit.
Bench Models
a. Check that all feet (and castors) are securely fitted.
b. Adjust feet to make Cooktop steady and level.
1. Remove all pot stands, pot stands supports, burner
caps, burner bowls, griddle plates and other
removable items.
2. Lower cooktop onto its rear face.
3. Attach four cooktop legs to leg mount points on
underside of cooktop unit.
4. Secure each leg hand tight.
5. Align 4 round holes in corners of base tray with 4
cooktop legs already fitted. (Ensure that base tray is
orientated with sloping edge of base tray facing front
of appliance).
6. Slot base tray onto 4 cooktop legs and push fully
home.
7. Secure base tray to cooktop legs by screwing two
front adjustable feet supplied, into base of front
cooktop legs. Secure each adjustable foot, hand
tight.
8. The two rear leg housings can be fitted with either
adjustable legs or rollers. (See Figure 1).
9. Fit rear rollers to rear leg ring plates and secure
using locating bolts supplied, tighten bolts using a
10mm spanner.
10. Lift cooktop back onto its legs and refit all items
removed at Item 1 above.
Left / Right hand side 250mm (*) 0mm
Rear 50mm 0mm
Fig 1
Sloping Edge
of Base Tray
Rear Roller
Base Tray
Cooktop
Legs
Leg Mount
Points
Cooktop
TO PREVENT EQUIPMENT DAMAGE AND RISK OF INJURY, REMOVE ALL LOOSE ITEMS FROM THE TOP OF THE
COOKTOP PRIOR TO FITTING THE LEG STAND.
Loading ...
Loading ...
Loading ...