Loading ...
Loading ...
Loading ...
66
PRODUCT INSTALLATION (cont.)
CONNECTING COLD WATER SUPPLY (CONT.)
3. Connect T-valve to the Toilet Tank Fill Valve
a. Place the Rubber Washer into the T-valve.
b. Install the T-valve with the rubber washer to the incoming
water connection on the bottom of your toilet tank.
4. Connect the water supply line coming from the wall to the
bottom of the T-valve.
NOTES:
• The T-valve connects to the fill valve directly under
your toilet tank - it does not connect at the wall.
• Only connect to the toilet cold water supply line.
• If your water supply line is rigid, you may need to
replace it before continuing.
Steps 3-4
Step 3a
toilet tank
t-valve
cold water
supply line
NOTES:
• You may wish to place a container under the tank to
catch any excess water.
• Do not continue without completing the above steps.
• Failure to do so could result in flooding, leaking or
damage to the Swash.
2. Turn o Water Supply Valve and flush toilet
a. Turn Water Valve o to stop the flow of water.
b. Flush toilet and hold down handle to completely
empty tank.
c. Disconnect Water Supply Hose from toilet tank.
Do not disconnect from the Water Supply Valve.
Step 2c
Loading ...
Loading ...
Loading ...