Loading ...
Loading ...
Loading ...
EN-11
IMPORTANT INFORMATION ABOUT
INSTALLING
This appliance is NOT intended for use in a commercial environment.
Please observe the installation instructions provided and note that
properly installed earthed socket.
In case a new socket is needed, installation and cable connection
accessible following installation, a pole disconnecting device must
be present on the installation site with a contact gap of at least 3 mm.
Adapters, multi-way strips and extension cords must not be used.
connection equipment must have a contact separation in all poles
that provide full disconnection, and the appliance must be
The accessible surface may be hot during operation.
PRODUCT INTRODUCTION
Loading ...
Loading ...
Loading ...