Loading ...
Loading ...
Loading ...
English 39
Operations
Filter Reset
After about 6 months (and typically, about 300 gallons (1200 L) of
water), the Filter indicator blinks red for several seconds when you
open the door, reminding you that the lter needs to be replaced.
When this happens, replace the lter, and then press and hold Ice
Maker for 3 seconds. The lter lifecycle will be reset and the Filter
indicator turns off.
NOTE
• Some regions have relatively large amounts of lime in their
water. This can reduce the lifecycle of the lter. In these areas,
you will have to replace the water lter more often than
specied above.
• If water is not dispensing properly, the water lter is most likely
clogged. Replace the water lter.
05 Water/Ice / Dispenser Lock (3 sec)
Water/Ice
You can dispense chilled water, cubed ice, or crushed ice. To
dispense, press Water/Ice. The corresponding indicator turns on.
Dispenser Lock
(Dispenser panel /
Dispenser lever)
To prevent use of the dispenser panel buttons and the dispenser
lever, press and hold
Water/Ice for more than 3 seconds.
If you press and hold the button again for more than 3 seconds, the
dispenser lock will be deactivated.
NOTE
• The Dispenser Lock on the dispenser panel does not affect the
controls on the main panel. To lock the main panel, use the
Control Lock function on the main panel.
• If you press Water/Ice for 3 seconds when both control lock and
dispenser lock are active, you will deactivate both control lock
and dispenser lock.
Untitled-7 39 11/11/2020 2:12:34 PM
Loading ...
Loading ...
Loading ...