Loading ...
Loading ...
Loading ...
12
en Operation
The appliance heats up the appliance
interior until the target temperature of the
next preparation step is reached. During
the heating phase, lines that light up in a
clockwise direction appear in the display.
Once the target temperature is reached, the
lines go out and the next preparation time
is shown in the display. The preparation
process starts automatically. The
preparation time counts down.
Selecting a pre-congured
preparation time
The pre-congured preparation time of
the level [ средняя ] (medium) is shown
on the control panel for each preparation
programme.
The preparation time can be shortened
[ короткая ] or lengthened [ длинная ].
1. Keep pressing button E until the
desired indicator is lit. The display
changes from [ средняя ] (medium)
to [ длинная ] (longer) and then to
[ короткая ] (shorter) before returning to
[ средняя ] (medium).
The corresponding pre-congured values
for the preparation time are shown in the
display.
2. Press button G to start the preparation
programme.
Extending the preparation time
during preparation
If the ingredients are not yet fully cooked
shortly before the end of a preparation
programme, the preparation time can be
extended.
1. To do this, press and hold button F.
The current preparation time will be briefly
shown on the display and will then increase
in 1-minute increments.
2. Press and hold the button until the
desired preparation time has been
reached.
3. Activate the newly set preparation time
using button G.
Setting a start time delay
The start time delay can be set for the
selected preparation programme so you
can enjoy a freshly prepared meal at a
specic time.
Note: the start time delay can only be
set for certain preparation programmes.
The pre-congured start time delay varies
among these preparation programmes.
1. Select the preparation programme.
2. Press button A. Button G ashes.
“00:10” ashes in the display.
Press button A repeatedly to increase the
displayed time. A brief press increases the
time by 5 minutes. A slightly longer press
increases the time by 10 minutes. Pressing
and holding button A for around 2 seconds
increases the time by 30 minutes.
3. Press button G when the desired start
time delay is displayed.
The desired start time delay is shown in
the display. [ таймер ] (timer) lights up in
the display. The time until the start counts
down. Once this time has elapsed, the
preparation process starts automatically.
Notes:
■ The start time delay can be switched
o at any time by pressing button G.
The preparation programme then starts
immediately.
■ If “00:10” does not ash in the display,
a start time delay cannot be set for the
selected preparation programme.
Prematurely terminating the
current preparation step
If the ingredients are cooked ahead of time
during one of the preparation steps, the
step can also be terminated manually.
1. To do this, press button G for at least
2 seconds.
This will terminate the current preparation
step. An audible signal will then sound as
usual once the next step can be carried out.
In the control panel, LEDs 1, 2, 3 or 4 are
shown accordingly and button G ashes.
2. Perform the next preparation step.
Loading ...
Loading ...
Loading ...