Loading ...
Loading ...
Loading ...
10
en Operation
Operation
Function selection mode
In function selection mode, all preparation
programmes are selected and all settings
are made on the appliance. To do this,
perform the following steps:
W Risk of scalding!
During operation, the appliance must never
be used without the pan and the steam
outlet inserted.
Caution!
Each time prior to operation, check the
appliance for damage, completeness,
cleanliness and proper installation.
X“Beforeusingforthersttime”see
page 8
1. The appliance is ready to use. Press
button B in order to access function
selection mode.
In function selection mode, button B and
the indicator [ мой режим ] (my mode) are
permanently lit. Button G ashes. “00:00”
is shown in the display.
Note: If no input is made on the control
panel within 5 minutes, the appliance
automatically switches to standby mode.
Selecting and starting a
preparation programme
There are 16 pre-congured preparation
programmes available to choose from.
X“Listofpreparationprogrammes”see
page 18
1. Fill the appliance with the desired
ingredients. To do this, open the lid and
pour the ingredients into the pan. The
measuring scale on the inside of the pan
can also be used to read the quantity.
Caution!
■ Do not ll the pan beyond the mark
[4.0 litres]!
■ Use only the spatula provided for stirring
(do not use metal cutlery).
2. Close the lid and press button B to
access function selection mode.
Note: Certain preparation programmes
or steps are carried out with the lid open.
X See recipe book provided
3. Keep pressing button D until the
desired preparation programme is
selected.
The corresponding LED lights up in the
control panel and the pre-congured
preparation time for the selected
preparation programme ashes.
4. Press button G to start the preparation
programme.
The appliance heats up the pan until the
target temperature is reached. During
the heating phase, lines that light up in a
clockwise direction appear in the display.
Once the target temperature is reached,
the lines go out and the preparation time is
shown in the display.
The preparation process starts
automatically.
Loading ...
Loading ...
Loading ...