Loading ...
Loading ...
Loading ...
21
PROBLEM
CAUSE SOLUTION
Brewing a partial cup
1) K-Cup® pack Holder may be
clogged
2) Water is not enough to brew
the selected size.
3) Calcium or scale is built up in
the brewer.
1) Clean K-Cup® pack Holder if
necessary and rinse under faucet
2) Make sure there is
enough water in the reservoir to
brew the selected serving size
3) De-scale the Brewer
Brewer is working but no
water comes out in first
time use or after long
time no use .
The pump is dry causing difficulty
for priming.
Plug the brewer in OFF mode, keep
pressing the POWER button to
initiate the pump till priming
succeeds.
Reservoir rattling Check to be sure that the
reservoir is well put on the
brewer
Put the reservoir on the brewer
perfectly.
Not priming at the first
use.
1) The reservior is empty .
2) Pump is dry after long storage or
at the first use.
1) Fill the water reservoir,
2) Turn off the brewer with the on/off
button, press the on/off button
and keep it pressed , the pump
starts to draw water, release the
button until water comes out.
Coffee drops around the
brewer hold when brewing.
1) Ground coffee stuck on to the
Water Outlet gasket as a result
the sealing is not good.
Pull off the gasket gently and rinse the
gasket with water, put it back gently
after rinse.
The on/off button is flashing Temperature sensor does not work
properly.
Call service line.
Water spitting from the
outlet of the brewer head.
1)
The brewing is stopped manually.
2) The handle or brewer head is
lifted while the button is flashing.
1) Leave the brewer to escape
steam/residual water completely, in 20
seconds from the brewing process is
interrupted.
K-cup is shrinked after
brewing
It is normal, depending on K-cup
from different brand.
Drinkpod LLC 888 852 7873
www.drinkpod.com
21
Loading ...