Loading ...
Loading ...
Loading ...
Option 2: Choose your K-Cup
Lift the handle of the brewer and insert a chosen K-Cup® pack into
the k-cup pack housing. Do NOT peel off the foil cover of the k-cup
pack.
CAUTION: Avoid the sharp piercing pin inside the brew head (it will
be hidden when the handle is opened)
Close by pressing down on top of the brew head handle
NOTE: K-Cup® pack will be punctured when closing the brew head.
TURN ON
Press the On/Off button to start the heating process.
After 30 seconds, the buttons will stop blinking indicating the heating up process is complete.
LETS GET BREWING
Select Brew Size by pressing the serving size button . You will hear a beep indicating the brew is
starting.
During the brewing process, the button will flash and it will automatically stop when the
brewing time is reached . You will hear 2 beeps.
(The process can be stopped manually by pressing the same button and beep 2 x).
Caution: Before opening the lid, allow the JavaPOD brewer to escape steam & residual water
for 20 seconds.
YOUR COFFEE IS READY
Remove the used K-cup from the brewer as per the figure,
& keep your hands far from the hot water outlet.
Caution: Do not open the handle when the machine is brewing, if the brewer is opened
unintentionally the pump will stop the brewing with all lights flashing & beeping indicating it is
danger of scalding and hot water spitting from the brewer head. Close the handle immediately
to its position.
Pump always stops earlier while this does not mean the brewing process is complete. The
button continues to blink for 20 seconds to allow steam/residual water to escape. Do NOT lift
the handle during this steam/residual water escaping stage.
Place your coffee cup in the dispense area on the drip tray.
NOTE: Drip Tray and Drip Tray Plate can be removed to
accommodate larger travel mugs.
Drinkpod LLC 888 852 7873
www.drinkpod.com
16
Loading ...
Loading ...
Loading ...