Loading ...
Loading ...
Loading ...
Help Guide
Wireless Stereo Headset
LinkBuds
When the headset or charging case gets wet
On water resistant performance of the headset
The charging case is not water resistant.
The water resistant specifications of this headset are equivalent to IPX4 in IEC 60529 “Degrees of protection against
ingress of water (IP Code)”, which specifies the degree of protection provided against the entry of water. The headset
cannot be used in water.
Unless the headset is used correctly, water may get into the headset and cause fire, electrocution, or malfunctions.
Note the following cautions carefully and use the headset correctly.
IPX4: Protected against water splashing from any direction.
The inside of the sound output parts and air holes on the headset are not completely watertight.
If any water droplets are left inside the sound output parts or air holes on the headset, the following issues may occur
temporarily, but they are not malfunctions.
Sounds become difficult to hear.
Unusual sounds are heard.
Voices during phone calls become difficult to hear.
Liquids that the water resistant performance specifications of the headset apply to
The water resistant performance of the headset is based on measurements performed by Sony under the conditions
described above. Note that malfunctions resulting from water immersion caused by customer misuse are not covered by
the warranty.
To protect the headset and charging case from being damaged
Carefully note the precautions below to ensure proper use of the headset.
Do not splash water forcibly into the sound output part or microphone of the headset.
Do not allow the headset to remain wet in a cold environment, as the water may freeze. To prevent malfunction,
make sure to wipe off any water after use.
Do not place the headset in water or use it in a humid place such as a bathroom.
Do not drop the headset or expose it to mechanical shock. Doing so may deform or damage the headset, resulting in
deterioration of water resistance performance.
If the headset gets wet,
Applicable: Fresh water, tap water, perspiration
Not
applicable:
Liquids other than those above (examples: soapy water, detergent water, water with bath agents,
shampoo, hot spring water, hot water, pool water, seawater, etc.)
Use a soft dry cloth to wipe off any water that gets on the headset.1.
Turn the sound output part downward and gently tap it about 10 times on a dry cloth, etc. to remove any water
collected inside.
2.
121
Loading ...
Loading ...
Loading ...