Loading ...
Loading ...
Loading ...
SONOS USER GUIDE
If you purchased a Boost to extend the range of your Sonos system, place the Boost in between the Sonos
speaker that’s out of reach and the rest of the Sonos system.
Wall mounting
1. Choose a location that’s close to an electrical outlet (power cord length is 6 ft. / 1.8m), away from heat
sources, hidden wiring, gas lines, etc.
2. Drive an American standard #6 round head screw (metric, M3.5 round head screw) into the wall, leaving a
gap between the wall and the screw head (approximately 0.13 in / 3.3mm).
Note: Pan head screws will also work.
3. Place the Boost on the wall and slide straight down, allowing the screw head to slip behind the smaller
end of the keyhole slot on the back of the Boost.
Specifications
* Specifications subject to change without notice.
Feature Description
Ethernet Connection 2-port switch, 10/100 Mbps, auto MDI/MDIX
Network Bridging 2-port switch allows a connection to your network or to other Sonos
speakers. Extend the range of SonosNet—use a Boost to extend the
SonosNet signal to areas that cannot reach the rest of the Sonos system.
Wireless Connectivity Works on SonosNet™, a secure AES encrypted, peer-to-peer wireless
mesh network dedicated exclusively for Sonos to reduce WiFi interference
Power Supply Auto-switching 100 - 240 V ~ 50-60 Hz 0.3 A AC universal input.
Output: 5.0 V, 2.0 A, 10.0 W
Average active efficiency: 79.1%
No-load power consumption: 0.03 W
Dimensions (H x W x D) 1.3 x 4.5 x 4.5 in. (33 x 115 x 115 mm)
Weight 0.42 lb (.191 kg)
Recommended Mounting Screw American standard #6 round head screw; Metric M3.5 round head screw
Operating Temperature 32°F to 104°F (0°C to 40°C)
Finish White/high quality polycarbonate material
Package Contents Sonos Boost, power cord, Ethernet cable, and Quickstart Guide.
Loading ...
Loading ...
Loading ...