Loading ...
Loading ...
Loading ...
8 9
VENTING GUIDE
FLUE EXHAUST
IN THE GARDEN
When installing the ALFA Oven
in your outdoor cooking area
with the venting away from any
structures or low ceilings, the ALFA
supplied high quality stainless steel
pipe and cap are sucient and
no additional piping is necessary.
You can customize these systems
vertically to assist draw or to help
with your install design. ALFA do
not oer custom pipe or chimney.
Supplied single wall wood stove
ue pipe can always be upgraded to double wall chimney.
WARNING: Major causes of vent related res is failure to maintain
required clearances (air spaces) to combustible materials.
Note: The outer walls of oven may reach high temperatures, more than 80°C
(176°F). Position the oven so it is not in contact with the wall or other furniture
and make sure there is a gap of at least 8 inches (20cm).
DO NOT CONNECT THIS TO A CHIMNEY FLUE
SERVING ANOTHER APPLIANCE
DIRECT VENT, DOUBLE
WALL CHIMNEY ON THE
TERRACE OR UNDER A
PERGOLA
• For outdoor settings where your
wood red oven will be under a
roof structures, pergolas, or any
type of ceiling/roof.
• Do not install the oven under
a roof or pergola. If you
are penetrating through an
overhead object OR A ROOF you
must remove supplied single
wall pipe and start WITH PIPE
AND CHIMNEY MANUFACTURED
BY SPECIALIZED COMPANIES
If you plan to extend the chimney more
than 1 meter, we recommend installing a
buttery valve to regulate the air ow.
OFFSET ELBOW INSTALLATION
• Avoid elbows if at all possible, as a vertical pipe or chimney is the most
ecient
OFFSET ELBOW
WARNING: DO NOT USE (2) 30-DEGREE ELBOWS
TO CREATE A 60-DEGREE ANGLE!
THIS VOIDS ALL WARRANTIES AND PRESENTS A FIRE HAZZARD WITHIN
THE PIPE OR CHIMNEY SYSTEM.
If your installation requirement cannot meet the basic standards be sure
to consult a professional and obtain necessary permits in advance.
VENTING SUPPORT AND ASSISTANCE
AREA CONTACTS
ITALY
PHONE: 800.77.77.30
numero verde
E-MAIL: [email protected]
NORTH AMERICA
United States & Canada
PHONE: +1 570 350 7939
E-MAIL: [email protected]
ROW
Rest of the world
PHONE: +39.0775.7821
E-MAIL: [email protected]
• Pipe or chimney systems may have a
maximum of 2 osets (two elbows total) of
30-degrees from vertical
• Do not combine elbows to create steeper
angles and never exceed 2 elbows in one
pipe or chimney system
• For Example: You could have a 30-degree
bend with a 0-48” horizontal pipe or chimney
and then another 30-degree bend back to
the vertical position
• Do not use with forced-draft, positive-
pressure appliances.
Loading ...
Loading ...
Loading ...