Loading ...
Loading ...
Loading ...
4
5
6
Secure the faucet by
firmly hand tightening
the rubber washer,
metal washer and
mounting nut back
on the faucet threads
underneath the sink.
Tighten the screws
on the mounting nut
with a Phillips
screwdriver.
Connect the water supply lines to the
hot and cold water valves. Tighten
with an adjustable wrench. Do not
overtighten.
7
Install the spray hose to the outlet
hoses. The outlet will connect with a
simple push. Then attach the weight to
the middle of the spray hose.
Turn the water valves back on and
then turn on the faucet. Run the water
flow for 15 seconds to clean up the
lines and check for any leaks.
The faucet should be flushed for
possible debris prior to using. Remove
the nozzle head by hand twisting it off.
Turn the faucet handle all the way on,
turn on the hot and cold water supply
and flush water lines for one minute.
Re-install the nozzle head by hand
twisting back on.
Attention: Make sure that the inlet
hoses are not twisted.
Cold
supply
hose.
Hot
supply
hose.
Push
Secure the faucet body to the deck
surface with the quick connect base. The
quick connect base will provide a more
stable and secure installation as it
enlarges the contact area with sink.
a
b
General step
Step for top mount stainless steel
sinks or decks smaller than ½ inch
OR
Loading ...
Loading ...
Loading ...