Loading ...
Loading ...
Loading ...
BEFORE OPERATING
Be%re operating yore new Microwave Drawer make sure you
read and understand this operation manual completely.
° Before the Microwave Drawer can be used, follow these
steps:
t Plug in the Microx_ave Drax_er. I II
appear.
2 Touch the Stop/Clear pad. _ will
appear.
3 Set clock.
TO SET THE CLOCK
t Touch Timer/Clock pad and number [_.
2 Touch number pads for correct time of day and touch
Thner/Clock pad again.
This is a 12 hour clock. If you attempt to enter an incorrect
clock time, _ will appear in the display. Touch the
Stop/Clear pad and re-enter the time.
* If the electrical power supply to your Microwave Drawer
should be interrupted, the display will intermittently show
_ _ after the po;_er is reinstated. If
this occurs during cooking, the program will be erased. The
time of day will also be erased. Simply touch Stop/Clear
pad and reset the clock for the correct time of day.
Note:
* The Microwave Drax_er can be programmed x_ith the
drawer open except for START/Minute Pins.
TIMER
"1Touch Timer/Clock pad and number [_.
2 Enter time.
3 Touch Timer/Clod{ pad again.
To cancel timer, touch Stop/Clear.
STOP/CLEAR
Touch the Stop/Clear padto:
"l Erase if you make a mistake during programming.
2 Cancel timer.
3 Stop the Microwave Drawer temporarily during timed
cooking.
4 Return the time of day to the display.
5 Cancel a program during cooking, touch tx_ice for timed
cooking.
OPEN OR CLOSE MICROWAVE DRAWER
{For models I(B-6015R & RB-6014L)
Always press the OPEN or CLOSE pad on the control panel
to open or close the Microwave Drawer.
Do not push or pull the Mierowave Drawer by hand,
except in case of emergency, such as a power failure. If
necessary, push or pull slowly.
{For model RB-6OO2L)
Open and close the Microwave Drawer by gently pulling and
pushing with even pressure near the middle of the drawer
handle.
10
Loading ...
Loading ...
Loading ...