1
Questions or Concerns? (855) 686-3835 • support@etekcity.com
Digital Kitchen Scale
Model No.: EK6212-S
2
Thank You.
Thank you for purchasing the EK6212-S Digital
Kitchen Scale by Etekcity. We are dedicated to
providing our customers with quality products
for building a better living. Should you have any
questions or concerns about using your new
product, feel free to reach out to our helpful
customer support team at (855) 686-3835 or by
email at support@etekcity.com. We hope you enjoy
your new product!
3
Package Contents
1 x Digital Kitchen Scale
2 x 1.5V AAA batteries
1 x User Manual
Table of Contents
Safety Information 4
Main Functions 5
Set-Up 6
Operation 7
Weight Measurement 7
Volume Measurement 8
Tare Function 9
Maintenance 9
Specifications 10
Troubleshooting 11
Warranty 12
Customer Support 13
4
Safety Information
IMPORTANT: Please read and comply with all
of the instructions and warnings provided in this
manual before using the product. Failure to comply
with the instructions and warnings provided herein
may result in inaccurate results and/or damage to
the product itself.
• Always place the scale on a hard, dry, and flat
surface before measurement in order to ensure
accurate results.
• Dirt, dust, vibration, wind, air currents, and
electromagnetic interference may contribute to
inaccurate results.
• DO NOT exceed the 11 lb (5 kg) weight capacity;
doing so may damage the scale. An overload
indicator will appear on the LCD display if the
limit is exceeded.
• Avoid exposing the device to damp environments
or extreme temperatures.
• DO NOT immerse the scale in water or corrosive
liquids. If a liquid is spilled on the digital display
or buttons, immediately wipe the scale clean with
a soft cloth in order to avoid potential internal
damage.
• When replacing batteries, make sure to insert
them under the correct polarity as indicated
within the battery compartment.
• If the low battery indicator is displayed, please
replace the batteries.
• DO NOT mix new and used batteries to power the
device.
• This scale is not intended for commercial or
heavy-duty use.
• Handle the scale with care. Keep the scale in a
cool, dry environment.
• If the scale fails to turn on, check if the batteries
are installed correctly. Replace the batteries if
necessary.
• If the scale is not in use for an extended period of
time, remove the batteries to conserve battery life
and extend the lifetime of the scale.
5
Main Functions
Digital Display
Function Diagram
1. Weighing Platform
2. LCD Display
3. Unit Button
4. Power/Zero Button
5. Anti-skid Padding
6. Battery Compartment
1. Weight Value
2. Tare Mode
3. Zero Weight
4. Negative Weight Value
5. Mode
6. Measurement Unit
1
3
2
1
6
3
4
5
5
2 4
6
Icon Mode Units Use
Weight Mode oz / lb:oz / g Measures the weight of food and solid objects.
Milk Volume ml Measures the volume of milk and other liquids with similar densities.
Water Volume ml Measures the volume of water and other similar liquids.
6
Set-Up
1. Open the battery compartment on the underside
of the scale.
2. Insert the included AAA batteries, making sure
they are under the correct polarity. Place the
battery cover back on.
3. Press the ‘Power/Zero’ button to turn on the
scale.
7
weight.
5. Press and hold ‘Power/Zero’ for 3 seconds to turn
off the scale.
Operation
Weight Measurement Mode
1. Place the scale on a flat, dry surface.
2. Press ‘Power/Zero’ to turn on the scale.
3. Press ‘UNIT’ to select your desired measuring
unit. Allow the scale to read zero before
measuring.
4. Gently place your object on the scale. The LCD
display will automatically display the object’s
NOTE: The scale with automatically turn off after 2
minutes of inactivity.
8
Volume Measurement Mode
1. Place the scale on a flat, level surface, then press
the power button to turn it on.
2. Press the ‘Unit’ button to select either the milk or
water volume measurement mode.
3. The scale will display “0” when ready.
4. Place an empty container onto the platform. The
screen will display the container weight.
5. Press the ‘Power/Zero’ button to tare the weight
of the container.
6. Once the screen displays “0” pour the liquid into
the container. The LCD screen will automatically
display the final volume.
NOTE: To reset, remove all weight from the platform
and press the ‘Power/Zero’ button.
9
Tare Function
The tare function allows you to measure objects in a
container without having to include the container’s
weight in the final measurement.
1. Place the scale on a flat, dry surface.
2. Power on the scale and wait for the display to
read zero.
3. Place an empty container on the scale and press
‘Power/Zero.’ The display will now show zero.
4. Place objects in the container, and the display will
show weight of the items.
5. Take the container off the platform when you
have finished weighing your items. Press ‘Power/
Zero’ once to reset the scale.
Maintenance
Use a slightly damp cloth to clean the surface of
the scale, followed by a dry soft cloth to wipe away
the remaining moisture. You can also use a dry soft
cloth to wipe off any dust that may be on the scale.
Be sure not to wash the device or immerse it in
water or any other liquids.
10
Specifications
Weight Capacity: 176.4oz / 11lb / 5000g / 5000ml
Units: oz / lb:oz / g / ml
Division Value: 0.1oz / 1g / 1ml
Auto-Off: 120 seconds
Backlight Auto-off:
30 seconds
Dimensions: 8.5” x 7.3” x 0.6” (217mm x 187mm x 16mm)
11
Troubleshooting
Problem Cause Solution
LCD display
is dim or
shows “Lo.”
Not enough power. Replace batteries.
Device does
not turn on.
Batteries are no longer good. Replace batteries.
Batteries not inserted correctly. Insert batteries under the correct polarity as
marked on battery compartment.
Display
shows “Err.”
Scale is placed on an uneven surface. Place scale on a flat, stable surface.
Scale needs to be reset. Remove the batteries, wait 10 seconds, then
replace the batteries.
Weight exceeds 11 lbs (5kg). Promptly remove object from scale to protect its
sensors.
Use a different scale with a higher weight range.
Objects exceeding 1000 g are on top of
scale before it is turned on.
Remove objects from scale; wait until display
reads zero before weighing.
Weight is unstable during measurement. Keep weight stable on the measuring platform.
12
Warranty
Terms & Policy
Etekcity warrants all products to be of the highest quality in material,
craftsmanship and service for a minimum of 1 year, effective from
the date of purchase. Warranty lengths may vary between product
categories. For specific warranty terms, please refer to your product’s
listing page or operation manual.
Under the limited warranty, Etekcity will replace or refund any product
found to be defective due to manufacturer flaws based on eligibility.
This warranty extends only to personal use and does not extend to
any product that has been used for commercial use, rental use, or
any other use in which the product is not intended for. There are no
warranties other than the warranties expressly set forth with each
product.
This warranty is non-transferrable. Etekcity is not responsible in any
way for any damages, losses or inconveniences caused by equipment
failure or by user negligence, abuse, or use noncompliant with the
user manual or any additional safety, use, or warnings included in the
product packaging and manual.
Etekcity and its subsidiaries assume no liability for damage caused by
the use of the product other than for its intended use or as instructed
above and in the user manual. Some states do not allow this exclusion
or limitation of incidental or consequential losses so the foregoing
disclaimer may not apply to you. This warranty gives you specific legal
rights and you may also have other rights which may vary from state
to state.
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF
THE LIMITED WARRANTY.
Should your product prove defective within the specified warranty
period, please return the defective unit in its original packaging with
(1) an original copy of the invoice, (2) your order confirmation number,
(3) and your warranty ID number.
Exceptions and Exclusions
• Damage due to abuse, accident, alteration, misuse, tampering or
vandalism.
• Improper or inadequate maintenance.
• Damage in return transit.
• Unsupervised use by children under 18 years of age.
Date of Purchase
Place of Purchase
Order Number
13
Customer Support
Should you encounter any issues or have any questions regarding your new product, feel free to contact our
helpful Customer Support Team. Your satisfaction is ours!
Customer Support
Etekcity Corporation
1202 N. Miller St. Suite A
Anaheim, CA 92806
Toll-Free: (855) 686-3835
Fax: (657) 202-1693
Local: (657) 500-1872
Email: support@etekcity.com
Support Hours
Monday - Friday:
9:00 am - 5:00 pm PST
*Please have your order confirmation number ready
before contacting customer support.
Scan here to join the community!
Visit us at www.etekcity.com
Building on better living.
