Loading ...
Loading ...
Loading ...
English
Installation
English36
4. Remove the two screws from the lever holder, and
then remove the holder cover.
5. Put the lever holder on the other side as shown, and
then tighten the screws. Install the holder cover on
the opposite side as shown.
6. Use a flat-head screwdriver to remove the two hinge
covers from the original side. Install the hinge covers
on the opposite side as shown.
B
7. Locate and remove the 10 screws as shown. Note that
screw B (x2) is longer than the others.
8. Remove the glass holder, and switch the positions of:
a. the hinge cover and the door handle.
b. the hinge holder and the glass-guide holder
9. Remove the door lever, and then move it to the other
side as shown.
Untitled-1 36 2021-10-20 11:36:47
Loading ...
Loading ...
Loading ...