Loading ...
Loading ...
Loading ...
REMOVING AND INSTALLING
DUST CANISTER
To remove dust canister: Twist the dust
canister and simply pull away from the tool
(Fig. 5).
To install dust canister: align dust port with
hole in canister and push canister onto tool
until it locks into place (Fig. 6).
CLEANING AND EMPTYING THE
DUST CANISTER
The dust canister is transparent which will
allow you to easily see when empting and
cleaning is requires.
To empty dust the canister: screw off and
remove microfilter from the dust canister.
Empty dust canister (Fig. 7).
It is recommended to loosen dust from the
microfilter by gently striking it against a
solid surface (Fig. 8).
Knock excess dust out of the microfilter, or
remove dust with your fingers or a soft
brush. You may notice that all the dust may
not come out of the canister. This will not
affect sanding performance but will reduce
dust collection efficiency.
NOTE: Do not wash the microfilter with
soap and water. Dust may become more
firmly lodged in the pores, which will
reduce dust collection, and damage the
micro filter.
To ensure optimum dust extraction, empty
and clean the canister and microfilter
frequently.
-11-
FIG. 6
DUST PORT
DUST
CANISTER
2
1
FIG. 7
DUST
CANISTER
MICROFILTER
Dust Collection
FIG. 8
MICROFILTER
Loading ...
Loading ...
Loading ...