Loading ...
Loading ...
into contact with the cutting edge of the blade
- Secure the group by turning the locking knob
- Set the bulkhead by turning the graduated knob to no.2
- Switch on, letting the blade turn for 1-2 minutes. When the blade is still, check to see if any burr has
formed on the edge
- After having verified the presence of burr, switch on and gently press button for about 3 seconds to remove
the burr produced during sharpening in (in this last phase both grinding wheels should be working)
- Turn the graduated knob back to position “0”
- After sharpening, move the sharpener group back to its original position, clean the edge of the blade and the
grinding wheels with alcohol
- After several sharpening operations, the grinding wheels should be cleaned with a brush to remove traces of
alcohol
Loading ...
Loading ...
Loading ...