Loading ...
Loading ...
Loading ...
User's Manual
65
Conflict
.
●
Invalid Access
: Alarm will be triggered when unauthorized access is detected by the system.
●
Security Exception
: Alarm will be triggered when security problem occurs.
●
You can set the alarm tone by selecting
Alarm
at the upper-right side of the Camera’s web page.
●
Traffic Light Fault
is only available in
E-Police
mode.
Procedure
Step 1 Select
Setting
>
Event
>
Exception
.
The following figure uses
SD Card Exception
as an example. For other events, refer to the
actual page.
Step 2 Configure the parameters.
Figure 4-65 SD card event
Refer to the actual page to view the parameters that you need to configure for each
abnormality.
Table 4-40 Parameters of abnormal events
Parameter Description
Enable
Select it to enable alarm of abnormal events. Select
Alarm
for
Traffic
Light Fault
event in
E-Police
mode.
Alarm-out Port
Select it to enable the corresponding alarm output of event, and
select the corresponding port.
Post-alarm
The alarm linkage keeps running for the defined time after alarm
ends. The time range is 10 s–300 s.
Max Time to Not Switch
Configure the maximum time that traffic light remains unchanged.
This parameter is required only for
Traffic Light Fault
in
E-Police
mode.
Login Attempt
Configure the number of login errors allowed. The range is 3–10
times.
Step 3 Click
Save
.
Loading ...
Loading ...
Loading ...