Loading ...
Loading ...
Loading ...
User's Manual
63
Face Overlay
for motor vehicles is only available in
ANPR
mode.
Step 3 For non-motor vehicles, select
Enable
to enable face overlay of the driver.
Step 4 Configure the overlay position and size of driver face and front-seat passenger face.
Step 5 Click
Save
.
4.7.4.7 Device Location
You can view the device position information, such as its longitude and latitude.
Select
Setting
>
Event
>
Device Location
.
4.7.5 Alarm
You can configure how the Camera responds when alarms occur.
4.7.5.1 Alarm Settings
You can connect the alarm output device to corresponding I/O port.
Procedure
Step 1 Select
Setting
>
Event
>
Alarm
>
Alarm
.
Step 2 Select the
Enable
checkbox to enable alarm input.
Figure 4-62 Alarm
Step 3 Configure the parameters.
Table 4-39 Alarm parameters
Parameter Description
Alarm-in Port Currently, only 4 channels support alarm input.
Schedule
Configure the time of arming and disarming.
Click
Setting
and configure the day and period of arming. Click
OK
to save the
period settings.
Anti-dither
The system records only one alarm event within the defined time, and the
time range is 0 s–100 s.
Sensor Type
NO
(normally open) and
NC
(normally closed) are available.
Alarm-out Port Select the alarm output port.
Loading ...
Loading ...
Loading ...