Loading ...
Loading ...
Loading ...
Burner ,Firebox and Control Knob
Place burner assembly into firebox. Fasten the burner assembly to the firebox using 5x15 fiber washers and #10-24xl/2"
machine screws. Insert #10-24x1-1/4" machine screws from outside firebox, then fasten with #10-24 flange nuts and 5x15
fiber washers from the inside( A ).
i_ Place firebox on cart. Make sure burner tubes are correctly engaged with valves. If burner is not level from left to right,
adjust the two screws attaching valve to control panel.Attach ignitor wire to ignitor( B ).
} Attach firebox with #10-24x2" machine screws, 5x15 Fiber washers and #10-24 flange nuts( C).
Push control knobs onto valve stems ( C ).
#10-24
Flange Nut
A
BurnerAssembly
4!
#10-24Xl/2"
Machine Screw
Qty.2
/
#10-24x1-1/4"
Machine Screw
5x15
Fiber Washer
i 5x15
Fiber Washer
#10-24x1/2"
Machine Screw
#10-24
Flange Nut
Qty. 8
#10-24x1-1/4"
Machine Screw
Qty.4
5x15
Fiber Washer
Qty.10
#10-24x2"
Machine Screw
Qty.4
#10-24x2" Machine Screw
5x15 Fiber Washer i
C
Heat Shield
For Tank
B
Ventur(tube
Ignitor wire
Make sure the Venturi tubes are located
underneath Heat Shield
-/
v
Control Knob
#10-24
...............Flange Nut
22
Loading ...
Loading ...
Loading ...