Loading ...
Loading ...
Loading ...
18
Ambient Water in Operation
- Without setting volume
1. Press the START/STOP button to instantly
dispense filtered ambient water. Press
START/STOP button once more to stop
dispensing water.
NOTE
If the START/STOP button is not pressed
a second time to stop, dispensing will
automatically stop after 60 seconds.
NOTE
Always ensure the correct sized cup/glass is
placed under the spout to collect the selected
volume of dispensed water.
Ambient Water in Operation
- When setting volume
1. Rotate the FUNCTION dial clockwise/anti-
clockwise for the default volume to appear
on the LCD screen; the 250ml default
volume will flash on the screen. Rotate the
FUNCTION dial clockwise or anticlockwise
to adjust the volume, then press the
FUNCTION dial to confirm the selection.
The volume icon indicator will appear on
the LCD screen to visually show you the
amount you are about to dispense
2. Press START/STOP button once to start
dispensing filtered ambient water at
the set volume. AMBIENT will flash on
the LCD screen, the water droplet light
will illuminate white to indicate water is
dispensing, and the FUNCTION dial light
will turn off.
3. Water will automatically stop dispensing
once the set volume has been reached and
the water droplet light will turn off. The unit
will return to standby mode.
COLD Water in Operation
- Without setting volume
1. Press the COLD button once, the blue LED
light ring will illuminate around the COLD
button, COLD and 5°C default cold temp
will appear on the display screen.
2. Press the FUNCTION dial to confirm
selection; the blue LED light ring around
COLD button will start to flash to indicate
that the water is reaching the default cold
temperature 5°C.
3. Once the water unit has reached the default
temperature, the blue LED light will stop
flashing and will illuminate solid blue to
indicate that the water dispenser is now
ready to dispense filtered chilled water at the
set temperature.
4. Press START/STOP button once; the unit
will start dispensing filtered chilled water,
the word COLD will flash on the LCD screen,
and the water droplet icon will illuminate
white to indicate water is dispensing.
NOTE
START/STOP button can be pressed to
dispense water before the unit reaches the set
temperature, however, the water dispensed will
not be at the set temperature.
5. Once the desired amount of water has been
dispensed, press START/STOP button again
to stop dispensing; the white LED light water
droplet icon will no longer illuminate and the
unit will return to standby mode.
NOTE
If the START/STOP button is not pressed
a second time to stop, dispensing will
automatically stop after 60 seconds.
NOTE
Always ensure the correct sized cup/glass is
placed under the spout to collect the selected
volume of dispensed water
Cold Water in Operation
- When setting volume
1. Press the COLD water button once; the blue
light around the COLD button will illuminate
and COLD will display on the screen. Rotate
the FUNCTION dial clockwise/anticlockwise
for the default temperature to appears on the
LCD screen; the 5°C default temperature will
Loading ...
Loading ...
Loading ...