Loading ...
Loading ...
Loading ...
11
DESCALE
Appears on the screen every 6 months as a
reminder to descale to keep the unit working to
its optimum performance.
NOTE
To descale more frequently than the
programmed descale reminders, press and
hold the HOT button for 3 seconds until
Descale appears on the screen.
To quit descale mode, press and hold the HOT
button again for 3 seconds.
FILL TANK
Appears on the screen when the water tank
level is low. The unit will not dispense water
until the tank is refilled.
The unit will beep 3 times and FILL TANK
will flash on the LCD screen. The water droplet
light on the START/STOP button illuminate
solid red to alert the user that the water tank
needs to be filled.
Once the tank has been filled, FILL TANK will
no longer illuminate on the LCD screen.
NOTE
Take care when removing the water tank from
the base after use as residual water may drip.
NOTE
The unit will not dispense any water while the
tank is below the minimum water level. Ensure
the water level is always above the MIN level
for optimum flow rate.
TEMP (°C) CONTROL & VOLUME (MLS)
When CUSTOM menu is selected, the
temperature (between 45°C-100°C) and the
volume of water dispensed (between 100mL-
1.2L) can be manually adjusted.
For AMBIENT, only the volume of water can
be manually adjusted (between 100-500ml).
COLD SETTING
Press COLD button to enter the cold
setting. Turn the FUNCTION dial to set the
temperature (between 5°C-15°C) and the
volume of water dispensed (between 100mL-
500mL) can be manually adjusted. then press
the FUNCTION dial to select.
HOT BEVERAGE MENU
Press the HOT button to enter programmed
MENU.
Turn the FUNCTION dial to navigate the
menu, then press the FUNCTION dial to
select.
HOT & COLD FAVOURITES
or
favourites icon appears on the
screen when a COLD or HOT FAVOURITE
button has been selected.
Loading ...
Loading ...
Loading ...