Loading ...
Loading ...
Loading ...
5
ENGLISH
1
Keep adequate ventilation space around the
refrigerator.
• The picture shows the minimum required space
for installing the refrigerator. The measurement
condition of energy consumption is conducted
under a different space dimension.
• By keeping greater space, the refrigerator may
consume a less amount of power consumption.
• If use the refrigerator in the smaller space
dimension than pictured below, it may cause
temperature rise in the unit, loud noise and failure.
• The space between the rear of the refrigerator
and the wall should be 50mm or more, and less
than 75mm. If the space is wider than 75mm, you
may get injured by touching compressor and its
peripheral parts which are extremely hot during the
operation.
Overall space required in use
Installation
Free standing type
2
Use the two front adjustable feet to place the
refrigerator À atly and ¿ rmly on the À oor.
Casters are located on the bottom of the
refrigerator
• The casters allow the refrigerator to move back and
forth.
3
Connect the appliance via a correctly installed
socket.
Before using your refrigerator
• Clean the inside parts with a cloth soaked in warm
water.
• If you use soapy water to clean, wipe it off thoroughly
with water.
Note
• Place your refrigerator to access the plug.
• Keep your refrigerator out of direct sunlight and do not
place next to heat generating appliance.
• Do not place your refrigerator directly on the ground.
Insert suitable stand such as wooden board under the
refrigerator.
90mm
or more
60mm
or more
60mm
or more
770mm
1400 mm
820mm
Adjustable foot
1265 mm
Casters (2pcs)
OM_B955-SJ-P50M-S_EN.indd 5 12/3/2562 BE 17:15
Loading ...
Loading ...
Loading ...