Loading ...
Loading ...
Loading ...
12
Before calling for service, check the following points.
Problem Solution
The lamps of control
panel are À ashing in
order.
The refrigerator is set at “Demonstration mode”.
Follow the steps 1 to 2 to cancel this mode.
1
Open the refrigerator door.
2
Press Extra cool button 5 seconds or more.
(All lamps and the indicator À ash 3 times.)
The outside of the
cabinet is hot when
touched.
It is normal. This is because of the hot pipe in the cabinet in order to prevent dew
generation.
Refrigerator makes loud
noise.
Following sounds are normal.
• The compressor makes loud noise when its operation starts
-- Sound becomes quieter after a while.
• The compressor makes loud noise once a day.
-- Operating sound is made immediately after automatic defrost operation of the cooling
unit.
• Sound of Àowing Àuid (gurgling sound, ¿zzing sound)
--It is caused by refrigerant À owing in pipes(sound may become louder from time to
time).
• Cracking or crunching sound, squeaking sound
-- It is caused by expansion and construction of inner walls and internal parts during
cooling.
Frost or dew appears
inside or outside the
refrigerator.
This may occur in one of the following cases. Use a wet cloth for wiping frost and a dry
cloth for wiping dew.
• When the ambient humidity is high.
• When the door is frequently opened and closed.
• When food containing plenty of moisture are stored. (Wrapping is required.)
• This phenomenon will appear more or less depending on the season (rainy season,
season), habits of usage and environmental conditions of each house.
The food in the
refrigerator compartment
is frozen.
• Is the refrigerator operated for a long time with refrigerator temperature control set MAX
COLDEST?
-- Change the temperature control to the other setting.
• Is the refrigerator operated for a long time with freezer temperature control set MAX
COLDEST?
-- Change the temperature control to the other setting.
• If ambient temperature is low, food may freeze even if the refrigerator compartment is set
MIN.
Odors in the compartment. • Wrapping is required for the foods with strong odors.
• Deodorizing unit cannot remove all odors.
• Clean the inside periodically.
Some lines are on the
surface of the plastic parts.
• These are not defects during production.
The meeting part of the resin material or
the junction part of the metallic mold are
remained like lines.
If you still require service
Refer to your nearest service agent approved by SHARP.
Before you call for service
Line
OM_B955-SJ-P50M-S_EN.indd 12 12/3/2562 BE 17:15
Loading ...
Loading ...
Loading ...