Home
Bookmarks
Home
Bosch
Bosch WAR28560LW/01 User Manual
Bosch WAR28560LW/01 Serie 6 Washing machine
User Manual
For WAR28560LW/01.
PDF File Manual
,
56 pages
,
Read Online
|
Download pdf file
en Instruction Manual and Installation Instructions
Washing machine
Your new washing machine
GB standard:
Display rules
: Warning!
Caution!
Note/tip
1. 2. 3. / a) b) c)
■ / -
Contentsen Instruction Manual and Installation Instructions
8 Intended use 4
( Safety instructions 5
7 Environmental protection 12
5 Positioning and connecting 14
* Getting to know the appliance 24
Z Laundry 28
P Overview of programmes 29
0 Programme default settings 34
\ Additional programme settings 35
1 Operating the appliance 36
Q Appliance settings 41
H Sensors 42
2 Cleaning and maintenance 42
3 Faults and what to do about them 46
4 After-sales service 52
[ Consumption values 53
J Technical data 54
8 Intended use
Intended use
■ This appliance is intended for private domestic use only.
■ Do not install or operate this appliance anywhere that is liable to experience frost and/or outdoor conditions. There is a risk that the appliance will be damaged if residual water in it freezes. If hoses freeze up, they may crack/burst.
■ This appliance must only be used for washing domestic laundry, consisting of machine-washable items and hand- washable woollens (see label on item). Using the appliance for any other purpose is outside of the scope of its intended application and...
■ This appliance is suitable for operation with mains water and commercially available detergents and care products (must be suitable for use in washing machines).
■ This appliance is intended for use up to a maximum height of 4000 metres above sea level.
( Safety instructions
Safety instructions
Children/people/pets
: Warning
Risk of death!
■ The appliance may be used by children over the age of 8 years and by persons with reduced physical, sensory or mental capacity or by persons with a lack of experience or knowledge as long as they are supervised or have received instruction on how...
■ Children must not play with this appliance.
■ Do not allow children to clean or maintain this appliance unsupervised.
■ Keep children under 3 years and pets away from this appliance.
■ Do not leave the appliance unattended when children or other people who are unable to assess the risks are in the vicinity.
: Warning
Risk of death!
■ Do not position the appliance behind a door, as this may obstruct the appliance door or prevent it from opening completely.
■ Once an appliance has reached the end of its life, pull the mains plug from the socket before severing the mains cable, and then destroy the lock on the appliance door.
: Warning
Risk of suffocation!
: Warning
Risk of poisoning!
: Warning
Risk of burns!
: Warning
Eye/skin irritation!
Installation
: Warning
Risk of electric shock/fire/ material damage/damage to the appliance!
■ The mains voltage on your power socket must match the rated voltage specified on the appliance (identification plate). The connected loads and the required fuse protection are specified on the identification plate.
■ The mains plug and the protective contact socket must match and the earthing system must be correctly installed.
■ The installation must have an adequate cross section.
■ The mains plug must be freely accessible at all times. If this is not possible, in order to comply with the relevant safety regulations, a switch (all pole disconnection) must be built into the permanent installation in accordance with electrical...
■ If using a residual current circuit breaker, only use one that bears the following mark: z. The presence of this mark is the only way to be sure that it fulfils all the applicable regulations.
: Warning
Risk of electric shock/fire/ material damage/damage to the appliance!
: Warning
Risk of fire/material damage/ damage to the appliance!
: Warning
Risk of injury/material damage/damage to the appliance!
: Warning
Risk of injury!
Caution!
Material damage/damage to the appliance
Operation
: Warning
Risk of explosions/fire!
: Warning
Risk of poisoning!
: Warning
Risk of injury!
: Warning
Risk of scalding!
: Warning
Eye/skin irritation!
Caution!
Material damage/damage to the appliance
Cleaning/Maintenance
: Warning
Risk of death!
■ Switch off the appliance. Disconnect the appliance from the power supply (pull out the plug).
■ Never take hold of the mains plug with wet hands.
■ When removing the mains plug from the socket, always take hold of the plug itself and never the mains cable, otherwise this may damage the mains cable.
■ Do not make any technical modifications to the appliance or its features.
■ Repairs and any other work on the appliance must only be conducted by our customer service or by an electrician. The same applies for replacing the mains cable (when necessary).
■ Spare mains cables can be ordered from our customer service.
: Warning
Risk of poisoning!
: Warning
Risk of electric shock/material damage/damage to the appliance!
: Warning
Risk of injury/material damage/damage to the appliance!
Caution!
Material damage/damage to the appliance
■ Do not allow these agents to come into contact with the surfaces of the appliance.
■ Clean the appliance with nothing but water and a soft, damp cloth.
■ Remove any detergent, spray or other residues immediately.
7 Environmental protection
Environmental protection
Packaging/used appliance
Dispose of packaging in an environmentally-responsible manner.
Keep children away from the packaging materials and packaging materials are not toys.
Reprocessing and reuse of packaging material saves raw materials, reducing waste.
All packaging materials used are in line with environmental protection requirements and reusable.
Name and content of hazardous substances in products
Note:
All of component parts in the BSH products that fall into the same category are covered in the table above, the component parts of this product depend on the actual situation. If you have any questions, please contact us by dialling the customer serv...
Tips on economical use
■ Always fill the appliance with the maximum amount of laundry for each programme. ~ Page 29
■ Wash normally soiled laundry without pretreating.
■ For light and normal soiling in laundry, you can save energy and detergent.
■ The selectable temperatures apply to the care labels on the textiles. The temperatures in the appliance may deviate from this so that you get the optimum mix of energy-saving and washing results.
■ Information on energy and water consumption:
■ Automatic switch off: If the appliance is not operated for approx. 5 minutes (depending on the water level inside of appliance), it will automatically switch off before the programme starts or after the programme has ended. Press the power button...
■ If the laundry will be dried in a dryer, select the spin speed according to the dryer manufacturer's instructions.
5 Positioning and connecting
Positioning and connecting
Included with the appliance
Note:
Check the appliance for transport damage. Never use a damaged appliance. If you have any complaints, contact the dealer from whom you purchased the appliance or our customer services.
■ Operating and installation instructions
■ Warranty
■ Supplementary sheet for the operating and installation instructions*
■ Bottom cover instruction*
■ Home Connect Installation Guides*
■ Cover caps for openings after the transport braces have been removed
Useful tools
■ Spirit level for aligning
■ Wrench with:
Installation
Note:
Humidity in the drum is caused by the final inspection.
Safety instructions
: Warning
Risk of injury!
Caution!
Damage to the appliance
Caution!
Water damage
Notes
■ In addition to the safety information listed here, the local water and electricity supplier may have special requirements.
■ If in doubt, have the appliance connected by a specialist.
Removing the foam block
Caution!
Damage to the appliance
: Warning
Risk of injury/damage to the appliance!
Note:
Remove the foam block first before you remove the transport locks.
1. Remove the foam block.
a) Tilt the appliance to the rear.
b) Remove the foam block and bottom pad.
2. Fit the bottom cover. (You can find it in the drum)
Note:
Installation surface
Note:
The appliance must be stable aligned so that it does not move around.
■ The installation surface must be firm and level.
■ Soft floors/floor coverings are not suitable.
Installation on a base or a wooden joist floor
Caution!
Damage to the appliance
Note:
On wooden joist floors, install the appliance:
■ In a corner, if possible,
■ On a water-resistant wooden board (min. 30 mm thick) which is screwed tightly to the floor.
Installation on a platform with drawer
Installing the appliance in a kitchenette
: Warning
Risk of death!
Notes
■ Recess width of 60 cm required.
■ Only install the appliance underneath a continuous worktop that is securely connected to adjacent cabinets.
Removing the transport locks
Caution!
Damage to the appliance
Note:
Keep the screws and sleeves in a safe place.
1. Take the hoses out of the holders.
2. Unscrew and remove all four transport brace screws.
a) Remove the mains cable from the holders.
b) Remove the sleeves.
3. Fit the covers.
4. Lock the covers firmly in place by applying pressure to the snap-in hooks.
Hose and cable lengths
Note:
If the hose holders are used, the possible hose lengths are reduced!
Available from dealer/customer service:
■ Longer supply hose (approx. 2.20 m).
■ Appliance’s tap.
Water inlet
: Warning
Risk of death!
Notes
■ Only operate the appliance using cold mains water.
■ Do not connect the appliance to the mixer tap of an unpressurised hot- water boiler.
■ Do not use a used supply hose. Only use the supply hose supplied or one that was purchased from an authorised specialist retailer.
■ Do not kink or squash the water supply hose.
■ Do not alter (shorten, cut through) the water supply hose (otherwise its strength is no longer guaranteed).
■ Only tighten the screw connections by hand. If the screw connections are tightened too much with a tool (pliers), the thread may become damaged.
Notes
■ When the tap is open, the water flow rate is at least 8 l/min.
■ If the water pressure is higher than this, a pressure-reducing valve must be installed.
Connection
Note:
Turn on the tap carefully, checking the leak tightness of the connection points. The screw connection is under mains water pressure.
Water outlet
: Warning
Risk of scalding!
Caution!
Water damage
Caution!
Damage to the appliance/fabrics
Notes
■ Do not kink the water drain hose or put strain on it lengthways.
■ The height of water outlet placement: Minimum 0 cm ~ Maximum 100 cm.
■ Drainage into a siphon
■ Drainage into a washbasin
■ Drainage into a plastic pipe with rubber bushing or into a drainage pit
Note:
Alignment
1. Loosen the lock nuts using a wrench, by turning it in a clockwise direction.
2. Check the alignment of the appliance with a spirit level, and adjust it if necessary. Change the height by turning the appliance feet.
3. Tighten the lock nut against the housing.
Electrical connection
Electrical safety
: Warning
Risk of electric shock!
Before washing for the first time
Note:
■ The appliance must have been installed and connected properly. ~ "Positioning and connecting" on page 14
■ Never switch on a damaged appliance.
1. Insert mains plug.
2. Turn the water tap on.
3. Press the # button till the indicator lamp lights up, release the button. The appliance is switched on.
4. Close the door. Do not load any laundry.
5. Select the Drum Clean 90°C programme.
6. Open the detergent drawer.
7. Pour approx. 1 litre of water into dispenser II.
8. Add standard detergent to dispenser II according to manufacturer’s instructions for light soiling.
Note:
9. Close the detergent drawer.
10. Select A.
11. When the programme ends, press the # button till the indicator lamp turns off, release the button.
Transportation
Preparatory work:
1. Turn off the water tap.
2. Reduce the water pressure in the supply hose. ~ Page 45
3. Drain any residual water. ~ Page 44
4. Disconnect the appliance from the mains.
5. Remove the hoses.
6. Empty the dispensers. ~ "Emptying the detergent draw, cleaning the detergent drawer and its housing" on page 43 and ~ "Cleaning the measuring aid A for liquid detergent" on page 43
Installing the transport locks:
1. Remove the covers and keep them in a safe place.
Note:
2. Insert all four sleeves.
a) Clip the mains cable securely in the holders.
b) Insert and tighten the screws.
c) Clip the hoses securely in the holders.
Notes
■ The transport braces must be removed. ~ "Removing the transport locks" on page 17
■ Pour approx. 1 litre of water into dispenser II, select the Rinse or Spin programme and start. This will prevent detergent from flowing straight into the drain during the next wash.
* Getting to know the appliance
Getting to know the appliance
Appliance
Control panel
Touch-Display
Indicators and buttons on the control panel
Setting
Note:
Other indicators
Information on
Z Laundry
Laundry
Protecting your laundry and appliance
Caution!
Damage to the appliance/textiles
■ Always follow the manufacturer's instructions when dosing all detergents, cleaning aids, care products and cleaning agents.
■ Do not exceed maximum load. Overfilling will impair the washing result.
■ Keep detergents and agents for the pretreatment of laundry (e.g. stain remover, prewash sprays, etc.) away from the surfaces of the appliance. Using a damp cloth, immediately remove any fine spray residue and other residue or droplets.
■ Empty any pockets. Remove any foreign objects.
■ Remove metal parts (paper clips, etc.).
■ Trousers, knitwear and knitted textiles, e.g. jersey garments, T-shirts or sweatshirts, should be turned inside out.
■ Ensure that underwired bras are appliance-washable.
■ Wash delicates in a net or bag (tights, underwired bras, etc).
■ Close zips, button up covers.
■ Brush sand out of pockets and collars.
■ Remove curtain fittings or place in a net/bag.
Sorting laundry
■ Type of fabric/fibre
■ Colour
Note:
■ Soiling Wash laundry with the same level of soiling together.
■ Symbols on the care labels
P Overview of programmes
Overview of programmes
Selectable programme
Programme/Type of washing
Options/Information
Notes
Notes
0 Programme default settings
Programme default settings
Temperature
Spin speed
Finish in time
To do this:
1. Select a programme (except MyTime programme).
2. Select the ˜ button repeatedly until the required number of hours is displayed.
Note:
3. Select the A button.
Note:
The length of the programme is automatically adjusted when the programme is running. Changes to the programme default settings or programme additional settings may also change the programme duration.
After starting the programme (if a “Finish in” time has been selected and the programme has not yet started), you can change the preselected number of hours as follows:
1. Select the A button.
2. Touch the ˜ or ~ button to change the number of hours.
3. Select the A button.
\ Additional programme settings
Additional programme settings
Note:
You can find possible additional programme settings in the overview; these differ depending on the model.
油渍 (Butter/Oil)/酒渍 (Red Wine)/酒渍 (Red Wine)/草渍 (Grass)
Types of stain that can be selected:
Select a programme with a stain type:
1. Arrange items of washing as usual.
2. Select a programme.
3. Select a stain type (depending on the selected programme).
4. Start the programme.
提速 (Speed)
Note:
Do not exceed the maximum load.
节电 (Eco)
轻松熨 (Easy iron)
Note:
If 轻松熨 (Easy iron) has been activated, the laundry will have retained a higher than average level of moisture after spinning.
带预洗 (Prewash)
Note:
Put the detergent into dispenser I and II.
高水位 & 加漂洗 (Water plus & Rinse plus)
免排水 (Rinse hold)
Note:
If you have selected 免排水 (Rinse hold), the laundry remains in the rinsing water after it has been washed. You either have to spin the laundry or drain the water in order to end the programme. Only then can you remove the laundry.
记忆 (Memory)
To store:
1. Switch on the appliance.
2. Select a programme.
3. If required, change the programme default settings and/or select programme additional settings.
4. Touch and hold 记忆 (Memory) button for approx. three seconds.
1 Operating the appliance
Operating the appliance
Preparing the appliance
Notes
■ Never switch on a damaged appliance!
■ Inform customer service!
1. Insert mains plug.
: Warning
Risk of death from electric shock!
2. Turn the water tap on.
3. Open the appliance door.
Switching on the appliance/ selecting a programme
Note:
If you have activated the childproof lock, you must deactivate it before you can set a programme.
Placing laundry into the drum
Notes
■ Unfold and load presorted items of laundry. Mix large and small items. Washing items of different size distribute themselves better during the spin cycle. Individual items of washing may cause an unbalanced load.
■ Observe the maximum specified load. Overfilling adversely affects the washing result and promotes creasing.
Measure and add detergent and care products
Caution!
Damage to the appliance
■ water hardness (ask your water supply company),
■ the manufacturer’s specifications on the packaging,
■ the amount of laundry,
■ soiling.
1. Pull out the detergent drawer.
: Warning
Eye / skin irritation!
2. Pour in detergent and/or cleaning product.
*depending on the model
Notes
■ Always follow the manufacturer's instructions when dosing all detergents, cleaning aids, care products and cleaning agents.
■ Dilute viscous fabric softener and fabric conditioner with water. This will prevent blockages.
■ Be careful when opening the detergent drawer while the appliance is running.
Position the measuring aid A for measuring the correct amount of liquid detergent:
1. Pull out the detergent drawer. Insert the liquid detergent container into dispenser II for main wash.
2. Pour liquid detergent into liquid detergent container and do not exceed the Maximum mark.
3. Close the detergent drawer.
Note:
Do not use the viscous liquid detergent.
Starting the programme
Note:
Foam detection
If the symbol Å also lights up in the Touch-Display, the appliance has detected too much foam during the wash cycle and automatically activated additional rinse cycles to remove the foam.
Childproof lock
■ E 3 秒 lights up: The childproof lock is activated.
■ E 3 秒 flashes: If the programme and programme settings are adjusted while childproof lock is activated.
Note:
When the programme ends, End is displayed. The door is unlocked. E 3 秒 remain on to remind you to deactivate the childproof lock.
Adding/removing laundry
■ The symbol Õ disappears, reloading is possible.
■ The symbol Õ lights up, reloading is not possible.
Notes
■ Do not leave the door open for too long when adding laundry as water from the laundry may leak out.
■ For safety reasons, the door remains locked when the water level or temperature is high, or while the drum is turning, and it is not possible to add laundry during this time.
Changing the programme
If you have started the wrong programme by mistake, you can change the programme as follows:
1. Touch the A button.
2. Select another programme.
3. And touch the A button again. The new programme starts from the beginning.
Cancel the programme
For programmes at high temperatures:
1. Touch the A button.
2. To cool down laundry: Select Rinse.
3. Touch the A button.
For programmes at low temperatures:
1. Touch the A button.
2. Select Spin.
3. Touch the A button.
Programme end
Removing laundry/switching off the appliance
1. Press the # button till the indicator lamp turns off, release the button. The appliance is switched off.
2. Open the door and remove the laundry.
3. Turn off the water tap.
Note:
Notes
■ Do not leave any items of laundry in the drum. They may shrink in the next wash or discolour another item.
■ Remove any foreign objects from the drum and the rubber seal – risk of rusting.
■ Wipe the rubber seal dry.
■ Leave the door and detergent drawer open so that any residual water can evaporate.
■ Always wait until the programme ends, as the appliance could still be locked. Then switch the appliance on and wait for it to unlock.
Q Appliance settings
Appliance settings
■ The volume of the information signal (e.g. at the end of the programme),
■ The volume of the operating signals,
■ The brightness of the touch display,
■ Switching the drum care information on/off.
Activating the setting mode
1. Switch on the appliance. The settings for the current programme are displayed.
2. Touch the 设置 (Setting) button.
Changing the signal volume
Adjustment values:
Changing the brightness of the display panel
Adjustment values:
Switching the drum-care information signal on/off
Adjustment values:
Exiting setting mode
To exit and save the settings:
■ Wait for approx. 15 seconds or
■ Switch off the appliance. The selected settings will take effect the next time the appliance is switched on.
H Sensors
Sensors
Unbalanced load detection system
Note:
Place large and small items of laundry evenly in the drum.
2 Cleaning and maintenance
Cleaning and maintenance
: Warning
Risk of death!
Caution!
Fire and explosion hazard!
Caution!
The appliance may be damaged!
Appliance housing/control panel
■ Remove the detergent residue immediately.
■ Wipe the housing and the control panel with a soft, damp cloth.
■ Do not use abrasive cloths, sponges or detergents (stainless steel cleaner).
■ Do not clean the appliance with a water jet.
Drum
Descaling
Emptying the detergent draw, cleaning the detergent drawer and its housing
If the appliance contains detergent or fabric softener residues:
1. Pull out the detergent drawer. Press down the insert and fully remove the drawer.
2. To remove the insert: Push the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush, and dry it. Clean the inside of the housing as well.
4. Fit the insert and lock it in place (push the cylinder onto the guide pin).
5. Push in the detergent drawer.
Note:
Leave the detergent drawer open so that any residual water can evaporate.
Cleaning the measuring aid A for liquid detergent
If it contains liquid detergent residue:
1. Hold the measuring aid, pull the cover upward and disconnect them.
2. Clean the measuring aid and cover with water and brush.
3. Install the cover back to the measuring aid. Pay attention to the assemble mark, and press the cover until click sounds.
Note:
Drain pump is blocked
Note:
Turn the water tap off to prevent more water from flowing in and to ensure that it is drained via the pump.
: Warning
Risk of scalding!
1. Press the # button. Pull out the mains plug.
2. Open the service flap.
3. Take the drain hose out of the retainer.
4. Carefully unscrew the pump cover; residual water may leak out.
5. Refit and screw on the pump cover. The handle must be in a vertical position.
6. Close the service flap.
Note:
To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into dispenser II and start the Rinse programme.
The drain hose at the siphon is blocked
1. Press the # button. Pull out the mains plug.
2. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out.
3. Clean the drain hose and siphon connecting piece.
4. Re-attach the drain hose and secure the connection point using the hose clamp.
Filter in the water supply is blocked
1. Turn off the water tap.
2. Select any programme (except Spin programmes).
3. Select the A button. Allow the programme to run for approx. 40 seconds.
4. Press the button #.
5. Pull out the mains plug.
1. Disconnect the hose from the rear of the appliance.
2. Use pliers to remove the filter.
3. Clean the filter with a small brush.
4. Connect the hose and check for leaks.
3 Faults and what to do about them
Faults and what to do about them
Emergency release
However, if the laundry has to be removed, the appliance door can be opened as follows:
: Warning
Risk of scalding!
: Warning
Risk of injury!
Caution!
Water damage!
1. Press the # button. Pull out the mains plug.
2. Open the service flap.
3. Drain the water. ~ Page 44
4. Pull the emergency release downwards with a tool and release.
Information on the display panel
Display
Cause/Remedy
Notes
Faults and what to do about them
Faults
Cause/Remedy
Note:
4 After-sales service
After-sales service
■ On the inside of the loading door
■ On the back of the appliance
Advice and repair order in the event of faults
[ Consumption values
Consumption values
J Technical data
Technical data
*9001402136*
Thank you for buying a Bosch Home Appliance!
Looking for help? You´ll find it here.
Page 1/56
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Page 34
Page 35
Page 36
Page 37
Page 38
Page 39
Page 40
Page 41
Page 42
Page 43
Page 44
Page 45
Page 46
Page 47
Page 48
Page 49
Page 50
Page 51
Page 52
Page 53
Page 54
Page 55
Page 56
Contents
Table of Contents
Search
Previous
Next
Bookmarks
3FHJTUFS
ZPVS
OFXEF
WJDFPO
.Z#PTDIOP
XBOE
HFUGS
FFCFOFGJUT
CPTDIIPNFDPN
XFMDPNF
HQ
,QVWUXFWLRQ0DQXDODQG,QVWDOODWLRQ,QVWUXFWLRQV
:DVKLQJPDFKLQH
;4*:$5/:;4*:$5/:
Loading ...
Loading ...
Loading ...
File type: PDF
File name: 49507113_war28560lw-01.pdf
File size: 2.48 MB
File Language: English
Pages: 56
Author: Bosch
File created: 2020-09-29
Published: 2023-11-05
Updated: 2023-11-05
Download File
Other documents for Bosch WAR28560LW/01
The following documents are available:
User Manual
User Manual - (English)
Read Online
|
Download pdf
Photos
Photos:
View Photos
Specifications
Brand:
Bosch
Model: WAR28560LW/01
Category:
Washers & Dryers
View in the file:
Full Specifications
See other models:
NHG206XEU/07
HEB23C156/70
PIM611B18E/03
SGV0903/08
WTB66200BY/04
Related Products
Bosch WAR28568LW/01
Bosch WAR28560LW/03
Bosch WAR28568LW/03
Bosch WAG16060MY/01
Bosch WAJ20060ES/01
Bosch WAS24460UC/01
Bosch WAX15060TI/01
Bosch WAP20160EE/01
Bosch WAX14060IN/01
Bosch WAX16068TI/01
Bosch WAU28460IN/01
Bosch WAP20160SG/01
Bosch WAW20460IL/01
Bosch WAA12160ME/01
Bosch WAT28560GB
Table of Contents
×
en Instruction Manual and Installation Instructions
1
Washing machine
1
Your new washing machine
2
GB standard:
2
Display rules
2
: Warning!
2
Caution!
2
Note/tip
2
1. 2. 3. / a) b) c)
2
■ / -
2
Contentsen Instruction Manual and Installation Instructions
3
8 Intended use 4
3
( Safety instructions 5
3
7 Environmental protection 12
3
5 Positioning and connecting 14
3
* Getting to know the appliance 24
3
Z Laundry 28
3
P Overview of programmes 29
3
0 Programme default settings 34
3
\ Additional programme settings 35
3
1 Operating the appliance 36
3
Q Appliance settings 41
3
H Sensors 42
3
2 Cleaning and maintenance 42
4
3 Faults and what to do about them 46
4
4 After-sales service 52
4
[ Consumption values 53
4
J Technical data 54
4
8 Intended use
4
Intended use
4
■ This appliance is intended for private domestic use only.
4
■ Do not install or operate this appliance anywhere that is liable to experience frost and/or outdoor conditions. There is a risk that the appliance will be damaged if residual water in it freezes. If hoses freeze up, they may crack/burst.
4
■ This appliance must only be used for washing domestic laundry, consisting of machine-washable items and hand- washable woollens (see label on item). Using the appliance for any other purpose is outside of the scope of its intended application and...
4
■ This appliance is suitable for operation with mains water and commercially available detergents and care products (must be suitable for use in washing machines).
4
■ This appliance is intended for use up to a maximum height of 4000 metres above sea level.
4
( Safety instructions
5
Safety instructions
5
Children/people/pets
5
: Warning
5
Risk of death!
5
■ The appliance may be used by children over the age of 8 years and by persons with reduced physical, sensory or mental capacity or by persons with a lack of experience or knowledge as long as they are supervised or have received instruction on how...
5
■ Children must not play with this appliance.
5
■ Do not allow children to clean or maintain this appliance unsupervised.
5
■ Keep children under 3 years and pets away from this appliance.
5
■ Do not leave the appliance unattended when children or other people who are unable to assess the risks are in the vicinity.
5
: Warning
5
Risk of death!
5
■ Do not position the appliance behind a door, as this may obstruct the appliance door or prevent it from opening completely.
5
■ Once an appliance has reached the end of its life, pull the mains plug from the socket before severing the mains cable, and then destroy the lock on the appliance door.
5
: Warning
5
Risk of suffocation!
5
: Warning
6
Risk of poisoning!
6
: Warning
6
Risk of burns!
6
: Warning
6
Eye/skin irritation!
6
Installation
6
: Warning
6
Risk of electric shock/fire/ material damage/damage to the appliance!
6
■ The mains voltage on your power socket must match the rated voltage specified on the appliance (identification plate). The connected loads and the required fuse protection are specified on the identification plate.
6
■ The mains plug and the protective contact socket must match and the earthing system must be correctly installed.
6
■ The installation must have an adequate cross section.
6
■ The mains plug must be freely accessible at all times. If this is not possible, in order to comply with the relevant safety regulations, a switch (all pole disconnection) must be built into the permanent installation in accordance with electrical...
6
■ If using a residual current circuit breaker, only use one that bears the following mark: z. The presence of this mark is the only way to be sure that it fulfils all the applicable regulations.
6
: Warning
7
Risk of electric shock/fire/ material damage/damage to the appliance!
7
: Warning
7
Risk of fire/material damage/ damage to the appliance!
7
: Warning
7
Risk of injury/material damage/damage to the appliance!
7
: Warning
7
Risk of injury!
7
Caution!
8
Material damage/damage to the appliance
8
Operation
8
: Warning
8
Risk of explosions/fire!
8
: Warning
9
Risk of poisoning!
9
: Warning
9
Risk of injury!
9
: Warning
9
Risk of scalding!
9
: Warning
9
Eye/skin irritation!
9
Caution!
9
Material damage/damage to the appliance
9
Cleaning/Maintenance
10
: Warning
10
Risk of death!
10
■ Switch off the appliance. Disconnect the appliance from the power supply (pull out the plug).
10
■ Never take hold of the mains plug with wet hands.
10
■ When removing the mains plug from the socket, always take hold of the plug itself and never the mains cable, otherwise this may damage the mains cable.
10
■ Do not make any technical modifications to the appliance or its features.
10
■ Repairs and any other work on the appliance must only be conducted by our customer service or by an electrician. The same applies for replacing the mains cable (when necessary).
10
■ Spare mains cables can be ordered from our customer service.
10
: Warning
10
Risk of poisoning!
10
: Warning
10
Risk of electric shock/material damage/damage to the appliance!
10
: Warning
10
Risk of injury/material damage/damage to the appliance!
10
Caution!
11
Material damage/damage to the appliance
11
■ Do not allow these agents to come into contact with the surfaces of the appliance.
11
■ Clean the appliance with nothing but water and a soft, damp cloth.
11
■ Remove any detergent, spray or other residues immediately.
11
7 Environmental protection
12
Environmental protection
12
Packaging/used appliance
12
Dispose of packaging in an environmentally-responsible manner.
12
Keep children away from the packaging materials and packaging materials are not toys.
12
Reprocessing and reuse of packaging material saves raw materials, reducing waste.
12
All packaging materials used are in line with environmental protection requirements and reusable.
12
Name and content of hazardous substances in products
12
Note:
12
All of component parts in the BSH products that fall into the same category are covered in the table above, the component parts of this product depend on the actual situation. If you have any questions, please contact us by dialling the customer serv...
12
Tips on economical use
13
■ Always fill the appliance with the maximum amount of laundry for each programme. ~ Page 29
13
■ Wash normally soiled laundry without pretreating.
13
■ For light and normal soiling in laundry, you can save energy and detergent.
13
■ The selectable temperatures apply to the care labels on the textiles. The temperatures in the appliance may deviate from this so that you get the optimum mix of energy-saving and washing results.
13
■ Information on energy and water consumption:
13
■ Automatic switch off: If the appliance is not operated for approx. 5 minutes (depending on the water level inside of appliance), it will automatically switch off before the programme starts or after the programme has ended. Press the power button...
13
■ If the laundry will be dried in a dryer, select the spin speed according to the dryer manufacturer's instructions.
13
5 Positioning and connecting
14
Positioning and connecting
14
Included with the appliance
14
Note:
14
Check the appliance for transport damage. Never use a damaged appliance. If you have any complaints, contact the dealer from whom you purchased the appliance or our customer services.
14
■ Operating and installation instructions
14
■ Warranty
14
■ Supplementary sheet for the operating and installation instructions*
14
■ Bottom cover instruction*
14
■ Home Connect Installation Guides*
14
■ Cover caps for openings after the transport braces have been removed
14
Useful tools
14
■ Spirit level for aligning
14
■ Wrench with:
14
Installation
14
Note:
14
Humidity in the drum is caused by the final inspection.
14
Safety instructions
15
: Warning
15
Risk of injury!
15
Caution!
15
Damage to the appliance
15
Caution!
15
Water damage
15
Notes
15
■ In addition to the safety information listed here, the local water and electricity supplier may have special requirements.
15
■ If in doubt, have the appliance connected by a specialist.
15
Removing the foam block
15
Caution!
15
Damage to the appliance
15
: Warning
15
Risk of injury/damage to the appliance!
15
Note:
15
Remove the foam block first before you remove the transport locks.
15
1. Remove the foam block.
15
a) Tilt the appliance to the rear.
15
b) Remove the foam block and bottom pad.
16
2. Fit the bottom cover. (You can find it in the drum)
16
Note:
16
Installation surface
16
Note:
16
The appliance must be stable aligned so that it does not move around.
16
■ The installation surface must be firm and level.
16
■ Soft floors/floor coverings are not suitable.
16
Installation on a base or a wooden joist floor
16
Caution!
16
Damage to the appliance
16
Note:
16
On wooden joist floors, install the appliance:
16
■ In a corner, if possible,
16
■ On a water-resistant wooden board (min. 30 mm thick) which is screwed tightly to the floor.
16
Installation on a platform with drawer
16
Installing the appliance in a kitchenette
16
: Warning
16
Risk of death!
16
Notes
16
■ Recess width of 60 cm required.
16
■ Only install the appliance underneath a continuous worktop that is securely connected to adjacent cabinets.
16
Removing the transport locks
17
Caution!
17
Damage to the appliance
17
Note:
17
Keep the screws and sleeves in a safe place.
17
1. Take the hoses out of the holders.
17
2. Unscrew and remove all four transport brace screws.
17
a) Remove the mains cable from the holders.
17
b) Remove the sleeves.
17
3. Fit the covers.
17
4. Lock the covers firmly in place by applying pressure to the snap-in hooks.
18
Hose and cable lengths
18
Note:
18
If the hose holders are used, the possible hose lengths are reduced!
18
Available from dealer/customer service:
18
■ Longer supply hose (approx. 2.20 m).
18
■ Appliance’s tap.
18
Water inlet
18
: Warning
18
Risk of death!
18
Notes
18
■ Only operate the appliance using cold mains water.
18
■ Do not connect the appliance to the mixer tap of an unpressurised hot- water boiler.
18
■ Do not use a used supply hose. Only use the supply hose supplied or one that was purchased from an authorised specialist retailer.
18
■ Do not kink or squash the water supply hose.
19
■ Do not alter (shorten, cut through) the water supply hose (otherwise its strength is no longer guaranteed).
19
■ Only tighten the screw connections by hand. If the screw connections are tightened too much with a tool (pliers), the thread may become damaged.
19
Notes
19
■ When the tap is open, the water flow rate is at least 8 l/min.
19
■ If the water pressure is higher than this, a pressure-reducing valve must be installed.
19
Connection
19
Note:
19
Turn on the tap carefully, checking the leak tightness of the connection points. The screw connection is under mains water pressure.
19
Water outlet
19
: Warning
19
Risk of scalding!
19
Caution!
19
Water damage
19
Caution!
19
Damage to the appliance/fabrics
19
Notes
19
■ Do not kink the water drain hose or put strain on it lengthways.
19
■ The height of water outlet placement: Minimum 0 cm ~ Maximum 100 cm.
19
■ Drainage into a siphon
20
■ Drainage into a washbasin
20
■ Drainage into a plastic pipe with rubber bushing or into a drainage pit
20
Note:
20
Alignment
20
1. Loosen the lock nuts using a wrench, by turning it in a clockwise direction.
20
2. Check the alignment of the appliance with a spirit level, and adjust it if necessary. Change the height by turning the appliance feet.
20
3. Tighten the lock nut against the housing.
20
Electrical connection
21
Electrical safety
21
: Warning
21
Risk of electric shock!
21
Before washing for the first time
21
Note:
21
■ The appliance must have been installed and connected properly. ~ "Positioning and connecting" on page 14
21
■ Never switch on a damaged appliance.
21
1. Insert mains plug.
21
2. Turn the water tap on.
21
3. Press the # button till the indicator lamp lights up, release the button. The appliance is switched on.
21
4. Close the door. Do not load any laundry.
21
5. Select the Drum Clean 90°C programme.
21
6. Open the detergent drawer.
21
7. Pour approx. 1 litre of water into dispenser II.
21
8. Add standard detergent to dispenser II according to manufacturer’s instructions for light soiling.
21
Note:
21
9. Close the detergent drawer.
21
10. Select A.
21
11. When the programme ends, press the # button till the indicator lamp turns off, release the button.
21
Transportation
22
Preparatory work:
22
1. Turn off the water tap.
22
2. Reduce the water pressure in the supply hose. ~ Page 45
22
3. Drain any residual water. ~ Page 44
22
4. Disconnect the appliance from the mains.
22
5. Remove the hoses.
22
6. Empty the dispensers. ~ "Emptying the detergent draw, cleaning the detergent drawer and its housing" on page 43 and ~ "Cleaning the measuring aid A for liquid detergent" on page 43
22
Installing the transport locks:
22
1. Remove the covers and keep them in a safe place.
22
Note:
22
2. Insert all four sleeves.
22
a) Clip the mains cable securely in the holders.
22
b) Insert and tighten the screws.
22
c) Clip the hoses securely in the holders.
22
Notes
23
■ The transport braces must be removed. ~ "Removing the transport locks" on page 17
23
■ Pour approx. 1 litre of water into dispenser II, select the Rinse or Spin programme and start. This will prevent detergent from flowing straight into the drain during the next wash.
23
* Getting to know the appliance
24
Getting to know the appliance
24
Appliance
24
Control panel
25
Touch-Display
26
Indicators and buttons on the control panel
26
Setting
26
Note:
27
Other indicators
27
Information on
27
Z Laundry
28
Laundry
28
Protecting your laundry and appliance
28
Caution!
28
Damage to the appliance/textiles
28
■ Always follow the manufacturer's instructions when dosing all detergents, cleaning aids, care products and cleaning agents.
28
■ Do not exceed maximum load. Overfilling will impair the washing result.
28
■ Keep detergents and agents for the pretreatment of laundry (e.g. stain remover, prewash sprays, etc.) away from the surfaces of the appliance. Using a damp cloth, immediately remove any fine spray residue and other residue or droplets.
28
■ Empty any pockets. Remove any foreign objects.
28
■ Remove metal parts (paper clips, etc.).
28
■ Trousers, knitwear and knitted textiles, e.g. jersey garments, T-shirts or sweatshirts, should be turned inside out.
28
■ Ensure that underwired bras are appliance-washable.
28
■ Wash delicates in a net or bag (tights, underwired bras, etc).
28
■ Close zips, button up covers.
28
■ Brush sand out of pockets and collars.
28
■ Remove curtain fittings or place in a net/bag.
28
Sorting laundry
28
■ Type of fabric/fibre
28
■ Colour
28
Note:
28
■ Soiling Wash laundry with the same level of soiling together.
28
■ Symbols on the care labels
28
P Overview of programmes
29
Overview of programmes
29
Selectable programme
29
Programme/Type of washing
29
Options/Information
29
Notes
31
Notes
33
0 Programme default settings
34
Programme default settings
34
Temperature
34
Spin speed
34
Finish in time
34
To do this:
34
1. Select a programme (except MyTime programme).
34
2. Select the ˜ button repeatedly until the required number of hours is displayed.
34
Note:
34
3. Select the A button.
34
Note:
34
The length of the programme is automatically adjusted when the programme is running. Changes to the programme default settings or programme additional settings may also change the programme duration.
34
After starting the programme (if a “Finish in” time has been selected and the programme has not yet started), you can change the preselected number of hours as follows:
34
1. Select the A button.
34
2. Touch the ˜ or ~ button to change the number of hours.
34
3. Select the A button.
34
\ Additional programme settings
35
Additional programme settings
35
Note:
35
You can find possible additional programme settings in the overview; these differ depending on the model.
35
油渍 (Butter/Oil)/酒渍 (Red Wine)/酒渍 (Red Wine)/草渍 (Grass)
35
Types of stain that can be selected:
35
Select a programme with a stain type:
35
1. Arrange items of washing as usual.
35
2. Select a programme.
35
3. Select a stain type (depending on the selected programme).
35
4. Start the programme.
35
提速 (Speed)
35
Note:
35
Do not exceed the maximum load.
35
节电 (Eco)
35
轻松熨 (Easy iron)
35
Note:
35
If 轻松熨 (Easy iron) has been activated, the laundry will have retained a higher than average level of moisture after spinning.
35
带预洗 (Prewash)
35
Note:
35
Put the detergent into dispenser I and II.
35
高水位 & 加漂洗 (Water plus & Rinse plus)
36
免排水 (Rinse hold)
36
Note:
36
If you have selected 免排水 (Rinse hold), the laundry remains in the rinsing water after it has been washed. You either have to spin the laundry or drain the water in order to end the programme. Only then can you remove the laundry.
36
记忆 (Memory)
36
To store:
36
1. Switch on the appliance.
36
2. Select a programme.
36
3. If required, change the programme default settings and/or select programme additional settings.
36
4. Touch and hold 记忆 (Memory) button for approx. three seconds.
36
1 Operating the appliance
36
Operating the appliance
36
Preparing the appliance
36
Notes
36
■ Never switch on a damaged appliance!
36
■ Inform customer service!
36
1. Insert mains plug.
37
: Warning
37
Risk of death from electric shock!
37
2. Turn the water tap on.
37
3. Open the appliance door.
37
Switching on the appliance/ selecting a programme
37
Note:
37
If you have activated the childproof lock, you must deactivate it before you can set a programme.
37
Placing laundry into the drum
37
Notes
37
■ Unfold and load presorted items of laundry. Mix large and small items. Washing items of different size distribute themselves better during the spin cycle. Individual items of washing may cause an unbalanced load.
37
■ Observe the maximum specified load. Overfilling adversely affects the washing result and promotes creasing.
37
Measure and add detergent and care products
38
Caution!
38
Damage to the appliance
38
■ water hardness (ask your water supply company),
38
■ the manufacturer’s specifications on the packaging,
38
■ the amount of laundry,
38
■ soiling.
38
1. Pull out the detergent drawer.
38
: Warning
38
Eye / skin irritation!
38
2. Pour in detergent and/or cleaning product.
38
*depending on the model
38
Notes
38
■ Always follow the manufacturer's instructions when dosing all detergents, cleaning aids, care products and cleaning agents.
38
■ Dilute viscous fabric softener and fabric conditioner with water. This will prevent blockages.
38
■ Be careful when opening the detergent drawer while the appliance is running.
38
Position the measuring aid A for measuring the correct amount of liquid detergent:
39
1. Pull out the detergent drawer. Insert the liquid detergent container into dispenser II for main wash.
39
2. Pour liquid detergent into liquid detergent container and do not exceed the Maximum mark.
39
3. Close the detergent drawer.
39
Note:
39
Do not use the viscous liquid detergent.
39
Starting the programme
39
Note:
39
Foam detection
39
If the symbol Å also lights up in the Touch-Display, the appliance has detected too much foam during the wash cycle and automatically activated additional rinse cycles to remove the foam.
39
Childproof lock
39
■ E 3 秒 lights up: The childproof lock is activated.
39
■ E 3 秒 flashes: If the programme and programme settings are adjusted while childproof lock is activated.
39
Note:
39
When the programme ends, End is displayed. The door is unlocked. E 3 秒 remain on to remind you to deactivate the childproof lock.
39
Adding/removing laundry
39
■ The symbol Õ disappears, reloading is possible.
39
■ The symbol Õ lights up, reloading is not possible.
39
Notes
40
■ Do not leave the door open for too long when adding laundry as water from the laundry may leak out.
40
■ For safety reasons, the door remains locked when the water level or temperature is high, or while the drum is turning, and it is not possible to add laundry during this time.
40
Changing the programme
40
If you have started the wrong programme by mistake, you can change the programme as follows:
40
1. Touch the A button.
40
2. Select another programme.
40
3. And touch the A button again. The new programme starts from the beginning.
40
Cancel the programme
40
For programmes at high temperatures:
40
1. Touch the A button.
40
2. To cool down laundry: Select Rinse.
40
3. Touch the A button.
40
For programmes at low temperatures:
40
1. Touch the A button.
40
2. Select Spin.
40
3. Touch the A button.
40
Programme end
40
Removing laundry/switching off the appliance
40
1. Press the # button till the indicator lamp turns off, release the button. The appliance is switched off.
40
2. Open the door and remove the laundry.
40
3. Turn off the water tap.
40
Note:
40
Notes
40
■ Do not leave any items of laundry in the drum. They may shrink in the next wash or discolour another item.
40
■ Remove any foreign objects from the drum and the rubber seal – risk of rusting.
40
■ Wipe the rubber seal dry.
40
■ Leave the door and detergent drawer open so that any residual water can evaporate.
40
■ Always wait until the programme ends, as the appliance could still be locked. Then switch the appliance on and wait for it to unlock.
40
Q Appliance settings
41
Appliance settings
41
■ The volume of the information signal (e.g. at the end of the programme),
41
■ The volume of the operating signals,
41
■ The brightness of the touch display,
41
■ Switching the drum care information on/off.
41
Activating the setting mode
41
1. Switch on the appliance. The settings for the current programme are displayed.
41
2. Touch the 设置 (Setting) button.
41
Changing the signal volume
41
Adjustment values:
41
Changing the brightness of the display panel
41
Adjustment values:
41
Switching the drum-care information signal on/off
41
Adjustment values:
41
Exiting setting mode
41
To exit and save the settings:
41
■ Wait for approx. 15 seconds or
41
■ Switch off the appliance. The selected settings will take effect the next time the appliance is switched on.
41
H Sensors
42
Sensors
42
Unbalanced load detection system
42
Note:
42
Place large and small items of laundry evenly in the drum.
42
2 Cleaning and maintenance
42
Cleaning and maintenance
42
: Warning
42
Risk of death!
42
Caution!
42
Fire and explosion hazard!
42
Caution!
42
The appliance may be damaged!
42
Appliance housing/control panel
42
■ Remove the detergent residue immediately.
42
■ Wipe the housing and the control panel with a soft, damp cloth.
42
■ Do not use abrasive cloths, sponges or detergents (stainless steel cleaner).
42
■ Do not clean the appliance with a water jet.
42
Drum
42
Descaling
42
Emptying the detergent draw, cleaning the detergent drawer and its housing
43
If the appliance contains detergent or fabric softener residues:
43
1. Pull out the detergent drawer. Press down the insert and fully remove the drawer.
43
2. To remove the insert: Push the insert upwards from below with your finger.
43
3. Clean the detergent dispenser tray and insert with water and a brush, and dry it. Clean the inside of the housing as well.
43
4. Fit the insert and lock it in place (push the cylinder onto the guide pin).
43
5. Push in the detergent drawer.
43
Note:
43
Leave the detergent drawer open so that any residual water can evaporate.
43
Cleaning the measuring aid A for liquid detergent
43
If it contains liquid detergent residue:
43
1. Hold the measuring aid, pull the cover upward and disconnect them.
43
2. Clean the measuring aid and cover with water and brush.
44
3. Install the cover back to the measuring aid. Pay attention to the assemble mark, and press the cover until click sounds.
44
Note:
44
Drain pump is blocked
44
Note:
44
Turn the water tap off to prevent more water from flowing in and to ensure that it is drained via the pump.
44
: Warning
44
Risk of scalding!
44
1. Press the # button. Pull out the mains plug.
44
2. Open the service flap.
44
3. Take the drain hose out of the retainer.
44
4. Carefully unscrew the pump cover; residual water may leak out.
44
5. Refit and screw on the pump cover. The handle must be in a vertical position.
45
6. Close the service flap.
45
Note:
45
To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into dispenser II and start the Rinse programme.
45
The drain hose at the siphon is blocked
45
1. Press the # button. Pull out the mains plug.
45
2. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out.
45
3. Clean the drain hose and siphon connecting piece.
45
4. Re-attach the drain hose and secure the connection point using the hose clamp.
45
Filter in the water supply is blocked
45
1. Turn off the water tap.
45
2. Select any programme (except Spin programmes).
45
3. Select the A button. Allow the programme to run for approx. 40 seconds.
45
4. Press the button #.
45
5. Pull out the mains plug.
45
1. Disconnect the hose from the rear of the appliance.
46
2. Use pliers to remove the filter.
46
3. Clean the filter with a small brush.
46
4. Connect the hose and check for leaks.
46
3 Faults and what to do about them
46
Faults and what to do about them
46
Emergency release
46
However, if the laundry has to be removed, the appliance door can be opened as follows:
46
: Warning
46
Risk of scalding!
46
: Warning
46
Risk of injury!
46
Caution!
46
Water damage!
46
1. Press the # button. Pull out the mains plug.
47
2. Open the service flap.
47
3. Drain the water. ~ Page 44
47
4. Pull the emergency release downwards with a tool and release.
47
Information on the display panel
48
Display
48
Cause/Remedy
48
Notes
49
Faults and what to do about them
49
Faults
49
Cause/Remedy
49
Note:
51
4 After-sales service
52
After-sales service
52
■ On the inside of the loading door
52
■ On the back of the appliance
52
Advice and repair order in the event of faults
52
[ Consumption values
53
Consumption values
53
J Technical data
54
Technical data
54
*9001402136*
56
Thank you for buying a Bosch Home Appliance!
56
Looking for help? You´ll find it here.
56
Search:
×
Search
