Tripp Lite U208-002-IND 2-Port RS-422/RS-485 USB to Serial FTDI Adapter

Owner's Manual - Page 5

For U208-002-IND. Also, The document are for others Tripp Lite models: U208-001-IND, U208-004-IND

PDF File Manual, 25 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
5
Installation
Specifications
Note: In most cases, the U208-004-IND will receive sufficient power from the connected computer
to operate. In the event that additional power is required, connect a user-supplied external power
supply between the external power connection on the unit and an external power source. The
U208-004-IND is compatible with listed LPS 5V DC power supplies using a 5.5 x 2.1 x 9.5 mm
output plug with a positive tip and negative sleeve.
1
Using the included USB cable, connect the USB to Serial adapter to an available USB
port on your computer.
2
Insert the included Driver CD into the computer’s CD/DVD drive. If your computer
does not have a CD/DVD drive, you can download the software at
www.tripplite.com/support.
3
In the Driver CD, navigate to the Drivers folder and the driver file applicable to your
operating system.
4
Run the driver file and follow the install prompts to complete installation.
5
Set the DIP switches on the unit to the appropriate serial mode (see DIP Switch
Settings for more information).
6
Connect the serial cable between the serial device and the serial ports on the unit.
Note: The RX status LED will blink green when serial data is being received. The TX status LED
will blink yellow when serial data is being sent.
Input Connector USB Type-B, Female
Output Connector U208-001-IND – (x1) DB9, Male
U208-002-IND – (x2) DB9, Male
U208-004-IND – (x4) DB9, Male
LEDs Green: Serial Data Received
Yellow: Serial Data Transmitted
Supported Protocols RS-422, RS-485
Max Baud Rate 921.6 Kbps
Max Data Transfer Speeds 1 Mbps
Stop Bits 1, 2
Data Bits 7, 8
FIFO U208-001-IND – Tx: 256B Rx: 128B
U208-002-IND – Tx: 4 kB per port Rx: 4 kB per port
U208-004-IND – Tx: 2 kB per port Rx: 2 kB per port
Flow Control Xon/Xoff
Parity Odd, Even, Mark, Space, No Parity
Operating Temperature 32 to 104°F (0 to 40°C)
Storage Temperature 14 to 131°F (-10 to 55°C)
Relative Humidity 5% to 90% RH, Non-Condensing
17-10-300-93375A.indb 5 11/10/2017 9:59:35 AM
Loading ...
Loading ...
Loading ...