Loading ...
Loading ...
Loading ...
IMPORTANT SAFETY INSTRUCTIONS
1. Read all instructions.
2. Use appliance only for its intended use.
3. To reduce the risk of electric shock, do not immerse the appliance in water or other liquids.
4. Never pull power cord to disconnect from outlet; instead, grasp plug and pull to disconnect. Do
not handle the plug with wet hands.
5. Do not allow cord to touch hot surfaces. Let appliance cool completely before putting away.
Loop cord loosely on cord hook when storing.
6. Always disconnect appliance from electrical outlet when filling with water, when emptying
water tank, and when not in use.
7. Do not operate appliance with a damaged cord, or if appliance has been dropped or damaged.
To reduce the risk of electric shock, do not disassemble or attempt to repair appliance.
8. Unplug power plug before filling or draining water tank, before leaving the room (even briefly),
before cleaning and maintenance and after use.
9. Close supervision is necessary for any appliance being used by or near children. Do not leave
appliance unattended while connected. Keep children and pets away from the Rotary Press.
10. Caution! There is a danger of burning when touching hot parts of the Rotary Press. Burns could
occur from touching hot metal parts, hot water, or steam. Use care when you turn a steam
appliance upside down – there may be hot water in the reservoir.
11. Only connect the Rotary Press to a power supply at the voltage shown on the identification
plate. All power carrying devices (sockets, switches, extension cables, house fuse, etc.) must be
designed for a power rating that is equivalent to the power supply requirement of the Rotary
Press as shown on the identification plate and guarantee proper protective grounding. To avoid
overloading, do not connect any other appliances or electric devices to this circuit.
12. If an extension cord is absolutely necessary, be sure the cord has an ampere rating in
accordance with the ampere rating of the Rotary Press. Cords rated for less amperage may
overheat. Care should be taken to arrange the cord so that the cord cannot be pulled or tripped
over.
13. The Rotary Press may only be used to iron garments and other items in accordance with
proper use.
14. Do not install the Rotary Press in rooms subjected to frost. Nevers switch “on” the Rotary Press
when frozen. The Rotary Press should be operated in normal room ambient temperatures and
humidity. If the Rotary Press is subjected to frost somehow, it should be plugged in only after
the condensation on the machine is completely dried out.
15. Switch on the Rotary Press only when it is in the unfolded and upright position.
16. Do not place objects in openings of the unit that are required to be clear.
17. Do not use the Rotary Press if the power cable or other power devices are damaged, if there
are doubts regarding the safety or danger due to unseen damage (for example, internal
05
Loading ...
Loading ...
Loading ...