Loading ...
Loading ...
Loading ...
19
Operation and Wash Cycles
Wi-Fi & REMOTE
To provision Wi-Fi, the user first needs to ensure the user interface is off. The user will
then hold down the power button for 3 seconds until APP is displayed on the screen.
The user will follow the prompts in the app. The machine will automatically go back to
the standard UI view and eventually auto-turn off if you don’ physically interact with
the product.
The Wi-Fi Symbol is off when Wi-Fi is off or has not been provisioned. During Wi-Fi
provisioning mode, the Wi-Fi symbol should be flashing, the Wi-Fi symbol should stay
flashing if Wi-Fi cannot connect to the router. In the standby state, press the power button
to shut down the machine, it will shut down directly, and the iot function is unavailable.
After the washing machine is started, the App end and the machine end should be
synchronized, and the washing machine can be suspended through the App.
Power off interface, long press "Power" 3 seconds, digital screen display APP, enter
provisiong mode, Wi-Fi will time out in 15 minutes, then the Wi-Fi could be turned off,
press "Power" button to close the user interface.
Once Wi-Fi is provisioned, the Wi-Fi symbol will stay solid and the user can use the app.
However, if they want to access the machine remotely they must put the machine in
"remote mode".
The user has the opportunity to control the machine from their phone, to do this they
need to put their machine into remote mode. To put the machine in the remote mode
you hold down the "Advance Wash" button and the "Delay Start" button at the same
time for 3 seconds.
Child lock can only be set and released on the local side.
In case of power failure, the machine will not accept the instructions of the App terminal.
The App can only restore the control function after the Wi-Fi remote control function is
activated after the machine is restarted.
OTA UPDATE
When there is an OTA (Over the Air) update available a notification will appear on the app.
When the user is ready to initiate the update, they will press the button in the app and
that will initiate the OTA update.
For OTA update to intiate the machine must be idle (cannot be running or off).
t
Hold power
for 3
seconds
APP will show on the 7 segment
screen.
When
Wi-Fi
has
been
provisioned
the Wi-Fi symbol will show
Remote can be disable when lid is open.
Loading ...
Loading ...
Loading ...