Loading ...
Loading ...
Loading ...
USING YOUR COOK'rOP
COOKTOP
The cooktop is designed with two con-
toured welts which contain spills until
they can be wiped up. Unlike the stan-
dard gas appliance, THIS COOKTOP
DOES NOT LIFT-UP NOR IS IT RE-
MOVABLE. To prevent damage to the
gas tubing or top, do not attempt to lift
cooktop.
GRATES
Burner grates must be properly posi-
tioned before cooking. Do not operate
burners without a pan on the grate. The
porcelain finish may chip without a pan
to absorb the intense heat.
When reinstalling square grates, place
indented sides together so straight
sides are at front and rear.
Y
lainfinish ofthe grate may chip without a
pan to absorb the intense heat from the
burner flame.
DUAL PURPOSE
SEALED BURNERS*
The four sealed burners are secured to
the cooktop and are NOT designed to
be removed by the consumer.
Since the four burners are sealed into
the cooktop, boilovers won't seep un-
derneath to the burner box area. Thus,
there are no hidden spills in the burner
box area to clean.
Some models feature two special HI
SPEED sealed burners. Use the H!
SPEED burners to quickly bring water to
a boil and for large - pot cooking. See
information on rating plate to determine
if your appliance features the HIGH
SPEED burner.
LOCATION OF BURNERS:
SPEED BURNER
HIGH SPEED BURNER
A properly adjusted burner with dean
ports willlight within a few seconds. On
natural gas, the flame wilt be blue with a
deeper blue inner core; there should be
no trace of yellow in the flame, indicating
an improper mixture of air/gas. This
wastes fuel, so have a serviceman ad-
just the mixture if a yellow flame occurs.
You may hear a "popping" sound on LP
gas when the surface burner is turned
off. This is a normal operating sound of
the burner.
To light burner:
1. Place utensil on burner grate.
2. Push in and turn knob to the LITE po-
sition.
3. After the burner lights, turn knob to
the desired flame size.
If flame shoutd go out during a cooking
operation, turn the burner off. IF GAS
HAS ACCUMULATED AND A
STRONG GAS ODOR IS DETECTED,
WAIT 5 MINUTES FOR THE GAS
ODOR TO DISAPPEAR BEFORE
RELIGHTING BURNER.
IGNITORS
Once burner lights, turn knob to the de-
sired setting. The sparking wili not stop
until the knob isturned from the LITE po-
sition.
Optional re-ignition system (if
equipped) will automaticaJly relight the
burner if a draft should extinguish it
when using a very low setting. When
this occurs, you will hear a sparking or
clicking sound.
CAUTION: Do not operate sealed burn-
er without apan on the grate. The porce- *U.S. Patent Pending
-7-
Loading ...
Loading ...
Loading ...