CU900ENT FITNESS BIKE
OWNER’S MANUAL
Spirit Fitness
www.spirittness.com
TABLE OF CONTENTS
3 IMPORTANT SAFETY INSTRUCTIONS
3 IMPORTANT ELECTRICAL INSTRUCTIONS
4 IMPORTANT OPERATION INSTRUCTIONS
4 PRODUCT REGISTRATION
5 CU900ENT ASSEMBLY INSTRUCTIONS
10 CONSOLE OPERATION
19 TOUCH SCREEN OPERATION
25 PROGRAMMING THE CONSOLE
32 GENERAL MAINTENANCE
33 MANUFACTURER’S LIMITED WARRANTY
Thank you for purchasing our product, please save these instructions. Please do not perform or attempt any
customizing, adjustments, repair or maintenance that is not described in this manual.
2
Spirit Fitness
Congratulations on your new tness bike and welcome to the Spirit Fitness family!
Thank you for your purchase of this quality tness bike from Spirit Fitness. Your new tness bike was
manufactured by one of the leading tness manufacturers in the world and is backed by one of the
most comprehensive warranties available. Through your dealer, Spirit Fitness will do all we can to make
your ownership experience as pleasant as possible for many years to come. If not purchased direct
from Spirit Fitness, the local dealership where you purchased this tness bike is your administrator for
all Spirit Fitness warranty and service needs. Their responsibility is to provide you with the technical
knowledge and service personnel to make your experience more informed and any difculties easier to
remedy.
Please take a moment at this time to record the name of the dealer, their telephone number, and the date
of purchase below to make any future, needed contact easy. We appreciate your support and we will
always remember that you are the reason that we are in business.
Yours in Health,
Spirit Fitness
NAME OF DEALER _____________________________________
DEALER PHONE # _____________________________________
PURCHASE DATE _____________________________________
3
www.spirittness.com
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
• Before beginning this or any exercise program,
consult a physician. This is especially important for
persons over the age of 35 or persons with pre-
existing health conditions.
• Keep children away from the tness bike. There are
obvious pinch points and other caution areas that can
cause harm.
• Keep hands away from all moving parts.
• Never drop or insert any object into any openings.
• Do not use outdoors.
• Do not attempt to use your tness bike for any
purpose other than for the purpose it is intended.
• The hand pulse sensors are not medical devices
.Various factors, including the user’s movement,
may affect the accuracy of heart rate readings. The
pulse sensors are intended only as exercise aids in
determining heart rate trends in general.
• Wear proper shoes. High heels, dress shoes, sandals
or bare feet are not suitable for use on your tness
bike. Quality athletic shoes are recommended to
avoid leg fatigue.
• Maximum User Weight: 450 lbs
• This appliance is not intended for use by persons with
reduced physical, sensory or metal capabilities, or
lack of experience and knowledge, unless they have
been given supervision or instruction concerning use
of the appliance by a person responsible for their
safety.
• Keep children under the age of 13 away from this
machine.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
IMPORTANT ELECTRICAL
INSTRUCTIONS
WARNING
NEVER expose this tness bike to rain or moisture.
This product is NOT designed for use outdoors,
near a pool or spa, or in any other high humidity
environment. The operating temperature specication
is 40 to 120 degrees Fahrenheit, and humidity is 95%
non-condensing (no water drops forming on surfaces).
4
Spirit Fitness
IMPORTANT OPERATION
INSTRUCTIONS
• NEVER operate this tness bike without reading
and completely understanding the results of any
operational change you request from the computer
console.
• Understand that changes in resistance do not occur
immediately. Set your desired resistance level on the
computer console and release the adjustment button.
The computer will obey the command gradually.
• Use caution while participating in other activities
while pedaling on your tness bike; such as watching
television, reading, etc. These distractions may cause
you to lose balance which may result in serious injury.
• Do not use excessive pressure on console control
buttons. They are precision set to function properly
with little nger pressure.
WARNING
This product can expose you to chemicals including
Toluene and Acrylamide which are known to the
State of California to cause Cancer and birth
defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov
RECORD YOUR SERIAL NUMBER
Please record the serial number of this tness product
in the space provided below. The serial number is
located at the front of the tness bike.
SERIAL NUMBER:
REGISTER YOUR
PURCHASE
The self-addressed product registration card
must be completed in full and returned to Spirit
Fitness. You can also go towww.spirittness.com
commercialwarrantyregistration.html under the Support
tab to register online.
5
www.spirittness.com
CU900ENT PRE-ASSEMBLY
TOOLS INCLUDED:
13/15mm Wrench
Phillips Screwdriver
5mm Allen Wrench
6mm Allen Wrench
PARTS INCLUDED:
1 Main Frame
1 Rear Stabilizer
1 Seat
2 Seat Bracket Covers
1 Console
1 Console Mast
1 Front Handle Bar
1 Handle Bar Cover
2 Console Mast Covers
2 Pedals
1 Cup Holder
1 Hardware Kit
UNPACKING
1. Cut the straps, then along the dotted line on the bottom of the box; lift the box over
the unit and unpack.
2. Locate the hardware package. The hardware is separated into four steps. Remove
the tools rst. Remove the hardware for each step as needed to avoid confusion.
The numbers in the instructions that are in parenthesis (#) are the item number from
the assembly drawing for reference.
6
Spirit Fitness
CU900ENT STEP ONE
HARDWARE FOR STEP 1
PART TYPE DESCRIPTION QTY
52 BOLT
M8XP1.25X20L
4
53 FLAT WASHER
8.5X18X1.5T
4
59 SCREW
M5XP0.8X12L
4
60 FLAT WASHER
13X23X2.0T
3
61 BOLT
M10X55L
3
1. Install REAR STABILIZER (4) to MAIN
FRAME (1) with 3 BOLTS (61) and 3
WASHERS (60).
2. Install SEAT (28) to SEAT POST (8) with
4 BOLTS (52) and 4 WASHERS (53).
3. Attach SEAT BRACKET COVERS (43
& 44) to SEAT POST (8) with 4 round
head SCREWS (59).
7
www.spirittness.com
CU900ENT STEP TWO
HARDWARE FOR STEP 2
PART TYPE DESCRIPTION QTY
52 BOLT
M8XP1.25X20L
6
112 FLAT WASHER
8.5X18X1.5T
6
54 SCREW
M5XP0.8X12L
4
1. Run the WIRING HARNESS through the
CONSOLE MAST (2) and out the top.
2. Install CONSOLE MAST (2) to MAIN
FRAME (1) with 6 BOLTS (52) and 6
WASHERS (112). Do not pinch any
wires.
3. Connect HGP CONNECTOR CABLES
(87 & 102) to CONSOLE (48). Run
cables through center of console bracket
and out the back.
4. Connect WIRING HARNESS to
CONSOLE (48).
5. Attach CONSOLE (48) to CONSOLE
MAST (2) using 4 SCREWS (54). Be
careful not to pinch any wires.
8
Spirit Fitness
CU900ENT STEP THREE
HARDWARE FOR STEP 3
PART TYPE DESCRIPTION QTY
53 FLAT WASHER
8.5x18x1.5T
8
56 BOLT
M8xP1.25x65L
4
57 LOCK WASHER
8x1.5T
4
58 NYLOCK NUT
M8xP1.25x7T
4
66 SCREW M5xP0.8x6L 2
1. Install HANDLEBARS (3) to CONSOLE
MAST (2) with 4 BOLTS (56), 4 LOCK
WASHERS (57), 8 WASHERS (53), and
4 NUTS (58). 4 WASHERS (53) should
be installed on each side of the
handlebars (3).
2. Connect HGP CONNECTOR CABLES
(87 & 102) to HGP cables coming out of
HANDLEBARS (3).
3. Attach CONSOLE BRACKET COVER (35)
to HANDLEBARS (3) using 2 SCREWS
(66).
9
www.spirittness.com
CU900ENT STEP FOUR
HARDWARE FOR STEP 4
PART TYPE DESCRIPTION QTY
54 SCREW
M5xP0.8x12L
2
55 SELF-TAPPING SCREW
3.5x12L
4
1. Attach CUP HOLDER (36) to CONSOLE
MAST (2) using 2 SCREWS (54).
2. Attach CONSOLE MAST COVERS (37
& 38) over CONSOLE MAST (2) using
4 SELF-TAPPING SCREWS (55).
3. Install PEDALS (11) into CRANK
ARMS (9 & 10).The left pedal has a
reverse thread and will be screwed in
counterclockwise. Tighten to 300 in-lb
(34 Nm) of torque.
10
Spirit Fitness
CU900ENT CONSOLE OPERATION
11
www.spirittness.com
12
Spirit Fitness
STARTING OPERATION
Plug in the power cord located at the front base of the unit. When the power is turned on, the screen
will show the initial image and then enter the Home screen.
Home screen: Begin operation by touching the icons.
Quick operating buttons are convenient for basic
bike functions.
13
www.spirittness.com
SETTINGS
Press the “Home” icon ten consecutive repetitions to enter the Maintenance suite.
The two most commonly used menus for setting up the exercise machine are described below; the TV
Setup and Maintenance menus. For information on other sections of the Maintenance suite refer to the
technical service manual or call Spirit service.
14
Spirit Fitness
TV SETUP
1. Begin by selecting either TV or HDMI as the tuner source.
2. Press OSD Menu. The rst highlighted item on the menu is
Air/Cable and then Cable or Air afterward. Press the
OSD Enter to change the selection between Cable and Air
Signal source, usually Cable).
3. After selecting Cable or Air use the arrows located below
the OSD Exit button to navigate down to Auto Scan
then press OSD Enter. The tuner will now scan for all
available channels. Press OSD Exit when done. You can
modify the channels by pressing the Update Channel List.
4. The OSD Command button is for engineering use only.
15
www.spirittness.com
MAINTENANCE MENU
• The Default language setup allows you to select the main
language that will be shown when the console is turned on.
You are able to select the language in the Home menu, but
once the user nishes using the machine the console will return
to this default language.
• Software Update Manager is used to install new versions of
the application software.
• Internet Manager allows you to modify the internet sites that are
shown in the Internet menu.
• Wi/Ethernet Setup is for selecting a Wi signal or
Ethernet addresses.
• Machine Setup allows you to select whether the Csafe port is
used for Csafe or CAB TV Tuner. This menu also allows you to
set the screen brightness.
• FTP Settings is the Spirit FTP site address where Error logs and
remote troubleshooting can be managed.
16
Spirit Fitness
INTERNET MANAGER
1. Remove a link by pressing the icon of the site you want to
remove for two seconds. A pop-up window will ask you to
conrm the removal.
2. To add a website press the dotted outline box. A pop-up
window will ask you to enter the web address and upload a
picture for the nal button if you wish. You could also just use a
default-look button and type in the name of the site, which will
then be the button icon.
17
www.spirittness.com
WIFI/ETHERNET SETUP
Press the desired button for setting up Wi or Ethernet.
WIFI SETUP
Turn Wi on and press scan for available Wi connections. Press
desired connection and follow the on-screen directions.
ETHERNET SETUP
Select DHCP to search for connection
or Static IP to enter manually
Press Ethernet Conguration to set
up a new connection.
18
Spirit Fitness
BLUETOOTH PAIRING PROCEDURE
1. Press the Blue Tooth (BT) icon on the bottom left of the screen.
2. The BT pop-up screen will appear. Turn on Phone/tablet BT and
then press Pair Mode on ENT Menu.
3. The menu with show Entering Pairing mode and the phone will
show A2DP as an available device.
4. The A2DP console and phone will ask you to conrm pairing,
press OK.
5. Pairing complete
6. Open audio APP on phone and the audio will be played
through the headphone port on the ENT console.
19
www.spirittness.com
TOUCH SCREEN OPERATION
LANGUAGE
When you press the Language button on Home screen, it
enters the menu with all language options.
There are 12 languages to choose from. Touch the desired
language and the system will return to the Home screen which
will now be in the chosen language.
20
Spirit Fitness
TV
When the TV button on the Home screen is pressed, it directly
enters TV interface.
Now you can enjoy TV programs. If you want to enjoy TV
while exercising, press Start button at front of the bike to initiate
Quick Start or press Programs to select a workout.
You can change the TV channels by pressing the channel up/
down buttons on the right side of the screen. You can also
use the Volume Up/Down buttons to change the sound levels. If
you want to silence the audio touch Mute button. Touch the Max
Screen to switch to full screen viewing. Touching anywhere on the
screen will return it to the original screen size.
21
www.spirittness.com
INTERNET
When the Internet button on the Home page is pressed, you
are directed to Internet interface.
There are 6 basic internet sites to choose from. You may
change or add other sites through the Maintenance program
(more on this later in the manual in the System Maintenance
Suite section).
NOTE: An internet cable connection or WIFI connection is
required.
EXERCISE PROGRAMS
When the Exercise Program button on the Home page is
pressed, the tness program menu appears.
There are 12 programs to choose from. Press the desired
program button and follow the on-screen directions. For
Manual Program as an example, just touch Manual button
on the screen to enter the programming for Manual.
22
Spirit Fitness
FUNCTIONS OF THIS BIKE
The Touch-control screen is used for operating all functions of the bike. You can directly touch any button
on the screen or through quick button on the bottom to control functions. On the lower portion of the
console there is the Start button to begin the workout, Stop button to pause/stop programs, Level button to
change workload and a Fan button to turn the fan on or off.
QUICK START
This is the quickest way to start a workout. After the console powers up you just press the Start button to
begin. This will initiate the Quick Start mode. In Quick Start the Time will count up from zero, all workout
data will start to accrue and the workload may be adjusted manually by pressing the Up and Down
buttons. The dot matrix display will show just the bottom row lit. As you increase the workload more rows
will light indicating a harder workout. The tness bike will get harder to pedal as the rows increase. The
dot matrix has 24 columns of lights and each column represents 1 minute. At the end of the 24th column
(or 24 minutes of work) the display will wrap around and start at the rst column again.
There are 40 levels of resistance – displayed as 10 rows of lights – available for plenty of variety. The rst
10 levels are very easy workloads, and the changes between levels are set to a good progression for de-
conditioned users. Levels 10-20 are more challenging but the increases from one level to the next remain
small. Levels 20-30 start getting tough as the levels jump more dramatically. Levels 30-40 are extremely
hard and are good for short interval peaks and elite athletic training.
23
www.spirittness.com
DISPLAY OPTIONS
SIMPLE
The default display at the start of a program is a Simple
display. The prole window shows the work level graphically.
All your workout values are displayed on the bottom of the
screen. Some of the data windows have a + sign at the top
indication more data available. Press the data window to see
other information available.
Below the prole window are buttons that allow you to switch
the display between the speed and incline proles. Below the
data displays are Track and Dashboard buttons for selecting
other display options. A muscle prole displays active muscle
groups as workloads change.
TRACK
The Track display gives a graphical representation of your
position on a virtual track. The image shows the track with
a lap counter and other values.
24
Spirit Fitness
HEART RATE FEATURE
The Pulse (Heart Rate) on the screen shows the current value of your heart rate in beats per minute. You
must use both left and right stainless steel sensors to pick up your pulse. Pulse values are displayed anytime
the computer is receiving a Grip Pulse signal. You may use the Grip Pulse feature while in Heart Rate
Control. The console will also pick up wireless heart rate transmitters that are 5 khz Polar compatible.
TO TURN THE BIKE OFF
The screen will automatically turn off (go to sleep) after 30 minutes of inactivity. This function is called sleep
mode. In sleep mode, the bike will power down everything except for a minimum of circuitry for detecting
button presses, so it will start up again if this is activated. There is only a tiny amount of current used in
sleep mode (about the same as your TV when it is turned off) and it is perfectly ne to leave the main
power switch on in sleep mode.
25
www.spirittness.com
PROGRAMMING THE CONSOLE
Each of the programs can be customized with your personal information and changed to suit your needs.
Some of the information asked for is necessary to ensure the readouts are correct. You will be asked for
your Age and Weight. Entering your Age ensures that the Heart Rate bar graph shows the correct number.
Your Age is also necessary during the Heart Rate control program to ensure the correct settings are in the
program for your Age. Otherwise the work settings could be too high or low for you; entering your Weight
aides in calculating a more correct Calorie reading. Although we cannot provide an exact calorie count
we do want to be as close as possible.
CALORIE NOTE: Calorie readings on every piece of exercise equipment, whether it is in a gym or at
home, are not accurate and tend to vary widely. They are meant only as a guide to monitor your progress
from workout to workout. The only way to measure your calorie burn accurately is in a clinical setting
connected to a host of machines. This is because every person is different and burns calories at a different
rate. Some good news is that you will continue to burn calories at an accelerated rate for at least an hour
after you have nished exercising!
26
Spirit Fitness
ENTERING A PROGRAM & CHANGING SETTINGS
When you enter a program (by pressing a program button then Enter button) you have the option of entering
your own personal settings. If you want to work out without entering new settings, then just press the Start
button. This will bypass the programming of data and take you directly to the start of your workout. If you want
to change the personal settings, then just follow the instructions in the Message Window. If you start a program
without changing the settings, the default, or pre-saved settings will be used.
The Spirit Fitness CU900ENT offers ten preset programs: Manual, Hills, Fat Burn, Cardio, Strength, Interval,
HR, Custom, Fitness Test, and Constant Power.
1. Select a program then press the Enter button to begin customizing the program with your personal data, or just
press the Start button to begin the program with the default settings.
2. After selecting a program and pressing enter to set your personal data, tap the Time window and use button pad
adjust the time. After adjusting the time, press Enter. (NOTE: You may press Start at any time during the programming
to begin with only settings you have modied at that point).
3. The Age window will now be displaying a value indicating your Age. (Entering the correct Age will affect the
Heart rate bar graph accuracy and also needed for the HR programs. Use numeric button pads to make adjustments,
and then press Enter conrm. Default age is 30 years old. Range=10 to 110).
4. The Weight window will now be showing a value indicating your Bodyweight. (Entering your correct bodyweight
affects the Kcal readout accuracy. Use the numeric button pad to make adjustments, and press the Enter button to
conrm. (Default weight is 70KG. Range=10 to 150).
5. The Max Level window will now be displaying a value indicating the maximum resistance level the program
will reach at its peak. Use numeric button pad to make adjustments, and then press Enter to conrm and continue
(Default max Level is 5. Range=5 to 40).
6. Now press the Start button to begin your workout.
27
www.spirittness.com
MANUAL
The level of resistance is controlled by the user. Increase or decrease
levels at any time during your workout.
HILL
This program follows a triangle or pyramid type of gradual
progression from approximately 10% of maximum effort (the level that
you chose before starting this program) up to a maximum effort which
lasts for 10% of the total workout time, then a gradual regression of
resistance back to approximately 10% of maximum effort.
FAT BURN
This program follows a quick progression up to the maximum
resistance level (default or user input level) that is sustained for 2/3
of the workout. This program will challenge your ability to sustain
your energy output for an extended period of time.
CARDIO
This program presents a quick progression up to near maximum
resistance level (default or user input level). It has slight uctuations
up and down to allow your heart rate to elevate, and then recover
repeatedly, before beginning a quick cool down. This will build up
your heart muscle and increase blood ow and lung capacity.
28
Spirit Fitness
STRENGTH
This program has a gradual progression of resistance up to
100% of maximum effort that is sustained for 25% of the workout
duration. This will help build strength and endurance in the lower
body and glutes. Cool down follows.
INTERVAL
This program takes you through high levels of intensity followed
by recovery periods of low intensity. This program utilizes and
develops your “Fast Twitch” muscle bers which are used when
performing tasks that are intense and short in duration. These
deplete your oxygen level and spike your heart rate, followed by
periods of recovery and heart rate drop to replenish oxygen.
Your cardiovascular system gets programmed to use oxygen
more efciently.
HR
The default value is 65% of your projected rate maximum. You
have the option of changing your target heart rate. The machine
will attempt to keep you within ve beats of your target heart rate.
29
www.spirittness.com
CUSTOM
You will create the desired resistance for each of the 20 segments of the program using the pop-out
buttonboard on this screen After the program has started, you still have the ability of changing the resistance
levels whenever you desire.
1. Select a Custom program then press the Enter button to begin customizing the program with your personal data, or
just press the start button to begin the program with the default settings.
2. The window will show the corresponding level prole, user can choose rename program by touching Rename button
and entering prole. After new setting, level prole will be show on screen for adjustment.
3. Press Next button for new level prole. A pop out message window will be displayed for Time, Age, Weight and
Max level entry.
4. Now press the Start button to begin your workout program.
FIT TEST PROGRAM
The Fit Test is based on the YMCA protocol, which is a sub-maximal VO2 test based on your heart rate. The
test consists of up to 4 stages. The resistance level increases at the end of each stage until you reach 85% of
the projected maximum heart rate or 2 consecutive stages over 110 beats per minute. You will receive a score
after the test is completed. NOTE: use a heart rate strap for best results.
Before The Test:
• Make sure you are in good health; check with your physician before performing any exercise if you are over the age
of 35 or persons with pre-existing health conditions.
• Make sure you have warmed up and stretched before taking the test.
• Do not take in caffeine before the test.
• Hold the hand grips gently, do not tense up.
30
Spirit Fitness
During The Test:
• The console must be receiving a steady heart rate for the test to begin. You may use the hand pulse sensors or wear
a heart rate chest strap transmitter.
• You must maintain a steady 50 rpm pedal speed. If your pedal speed drops below 48 rpm or goes above 52 rpm
the console will emit a steady beeping sound until you are within this range.
• You may scroll through the various data readings by pressing the Display button under the Message Window.
• The Message Window will always display your pedal speed on the right side to help you maintain 50 rpm.
• The data shown during the test is:
1. Work in KGM is actually an abbreviated form of kg-m/min. which is a work measurement of kilogram-force meter/minute
2. Work in Watts (1 watt is equal to 6.11829727787 kg-m/min.)
3. HR is your actual heart rate; TGT is the target heart rate to reach to end the test.
4. Time is the total elapsed time of the test.
After The Test:
Cool down for about one to three minutes.
Take note of your score because the console will automatically return to the start-up mode after a few minutes.
31
www.spirittness.com
VO2MAX CHART FOR FEMALES AND DECONDITIONED MALESVO2MAX CHART FOR MALES AND VERY FIT FEMALES
What Your Score Means:
32
Spirit Fitness
CONSTANT POWER
A watts program is a controllable constant power whose level adjusts when the speed is changed. Choose either
faster pedaling at a lower resistance level or slower pedaling at a higher resistance level.
GENERAL MAINTENANCE
Wipe down all areas in the sweat path with a damp cloth after each workout. If a squeak, thump, clicking
or rough feeling develops the main cause is most likely one of two reasons:
1. The hardware was not sufciently tightened during assembly. All bolts that were installed during assembly need to
be tightened as much as possible. It may be necessary to use a larger wrench than the one provided if you cannot
tighten the bolts sufciently. It is important to note that 90% of calls to the service department for noise issues can be
traced to loose hardware.
2. The crank arm nut needs to be retightened. If squeaks or other noises persist, check that the unit is properly leveled.
There are 2 leveling pads on the bottom of the rear stabilizer, use a 14mm wrench (or adjustable wrench) to adjust
the levelers.
33
www.spirittness.com
CONSTANT POWER
A watts program is a controllable constant power whose level adjusts when the speed is changed. Choose either
faster pedaling at a lower resistance level or slower pedaling at a higher resistance level.
GENERAL MAINTENANCE
Wipe down all areas in the sweat path with a damp cloth after each workout. If a squeak, thump, clicking
or rough feeling develops the main cause is most likely one of two reasons:
1. The hardware was not sufciently tightened during assembly. All bolts that were installed during assembly need to
be tightened as much as possible. It may be necessary to use a larger wrench than the one provided if you cannot
tighten the bolts sufciently. It is important to note that 90% of calls to the service department for noise issues can be
traced to loose hardware.
2. The crank arm nut needs to be retightened. If squeaks or other noises persist, check that the unit is properly leveled.
There are 2 leveling pads on the bottom of the rear stabilizer, use a 14mm wrench (or adjustable wrench) to adjust
the levelers.
NORMAL RESPONSIBILITIES OF THE FACILITY
The facility is responsible for the items listed below:
1. The warranty registration card must be completed and returned to the address listed on the card within 10 days
of the original purchase, or completed online to validate the manufacturer’s limited warranty.
2. Proper use of the tness equipment in accordance with the instructions provided in this manual
3. Proper installation in accordance with instructions provided with the tness equipment and with all local electric
codes.
4. Expenses for making the tness equipment accessible for servicing, including any item that was not part of the
tness equipment at the time it was shipped from the factory.
5. Damages to the tness equipment nish during shipping, installation or following installation.
6. Routine maintenance of this unit as specied in this manual.
WARRANTY
Commercial
(All Facilities)
FRAME
Lifetime
EMS BRAKE
5 Years
PARTS
3 Years
LABOR
3 Years
FITNESS BIKE WARRANTY EFFECTIVE JANUARY 1, 2017
Spirit Fitness warrants this tness bike for a period of time listed below from the date of sale, as determined by sale
receipt, or in the absence of a sales receipt eighteen (18) months from the original factory shipping date. Spirit Fitness’
responsibilities include providing new or remanufactured parts, at Spirit Fitness’ option, and technical support to our
independent dealers and servicing organizations. In the absence of a dealer or service organization, these warranties
will be administered by Spirit Fitness directly. The warranty period applies to the following components:
34
Spirit Fitness
EXCLUSIONS
This warranty does not cover the following:
1. CONSEQUENTIAL, COLLATERAL, OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL
EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY. NOTE: Some states
do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not
apply to you.
2. Service call reimbursement to the facility. Service call reimbursement to the dealer that does not involve malfunction or
defects in workmanship or material, for units that are beyond the warranty period, for units that are beyond the service
call reimbursement period, for tness equipment not requiring component replacement, or tness equipment not in non-
dues paying facility or household use.
3. Damages caused by services performed by persons other than authorized Spirit Fitness service companies; use of parts
other than original Spirit Fitness parts; or external causes such as corrosion, discoloration of paint or plastic, alterations,
modications, abuse, misuse, accident, improper maintenance, inadequate power supply, or acts of God.
4. Products with original serial numbers that have been removed or altered.
5. Products that have been: sold, transferred, bartered, or given to a third party.
6. Products that do not have a warranty registration card on le at Spirit Fitness. Spirit Fitness reserves the right to request
proof of purchase if no warranty record exists for the product.
7. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.
8. Product used in prisons and correctional facilities
Warranties outside of the United States may vary. Please contact your local dealer for details.
35
www.spirittness.com
SERVICE
Keep your bill of sale. Twelve (12) months from the date on the bill of sale or eighteen (18) months from the
date of factory shipping as determined by the serial number establishes the labor warranty period should
service be required. If service is performed, it is in your best interest to obtain and keep all receipts. This
written warranty gives you specic legal rights. You may also have other rights that vary from state to state.
Service under this warranty must be obtained by following these steps, in order:
1. Contact your selling authorized Spirit Fitness dealer. OR
2. Contact your local authorized Spirit Fitness service organization.
3. If there is a question as to where to obtain service, contact our service department at (870) 935-1107.
4. Spirit Fitness’ obligation under this warranty is limited to repairing or replacing, at Spirit Fitness’ option, the product
through one of our authorized service centers. All repairs must be preauthorized by Spirit Fitness.
5. The owner is responsible for adequate packaging upon return to Spirit Fitness. Spirit Fitness is not responsible for
damages in shipping. Make all freight damage claims with the appropriate freight carrier. DO NOT SHIP ANY
UNIT TO OUR FACTORY WITHOUT A RETURN AUTHORIZATION NUMBER. All units arriving without a return
authorization number will be refused.
6. For any further information, or to contact our service department by mail, send your correspondence to:
SPIRIT FITNESS, INC.
P.O. Box 2037
Jonesboro, AR 72402-2037
Product features or specications as described or illustrated are subject to change without notice. All warranties are made by Spirit Manufacturing, Inc.
This warranty applies only in the 48 contiguous United States. NOTE: This does not apply to Alaska or Hawaii.
36
Spirit Fitness
NOTES
37
www.spirittness.com
NOTES
800.258.4555
spiritservice@spirittness.com
www.spirittness.com
Spirit Fitness
3000 Nestle Road
Jonesboro, AR 72401
CU900ENT Owners Manual
© 2018 All Rights Reserved
Revision: 08.05.2018
