Loading ...
Loading ...
Loading ...
• Any excess of spilled material should be removed before cleaning.
the maximum connected load and that is in line with current legislation.
The yellow-green earth cable should not be interrupted by the breaker.
The socket or omnipolar breaker used for the connection should be
easily accessible when the appliance is installed.
• A long power supply failure during an occurring cooking phase may
cause a malfunction of the monitor. ln this case contact customer
service.
• WARNING: Do not line the oven walls with aluminium foil or single-use
protection available from stores. Aluminium foil or any other protection,
in direct contact with the hot enamel, risk melting and deteriorating the
enamel of the insides.
• The appliance must not be installed behind a decorative door in order
to avoid overheating.
• When you place the shelf inside, make sure that the stop is directed
upwards and in the back of the cavity. The shelf must be inserted
completely into the cavity.
• WARNING: Never remove the oven door seal.
• lf the power cable is damaged, it should be substituted with a cable or
special bundle available from the manufacturer or by contacting the
customer service department. The type of power cable must be
H05V2V2-F. This operation should be carried out by a suitably qualified
professional. The earth conductor (yellow-green) must be
approximately 10 mm longer than the other conductors. For any repairs,
refer only to the Customer Care Department and request the use of
original spare parts.
• The disconnection may be achieved by having the plug accessible or
by incorporating a switch in the fixed wiring in accordance with the
wiring rules.
• Failure to comply with the above can compromise the safety of the
appliance and invalidate the guarantee.
EN 20
Loading ...
Loading ...
Loading ...