Makita GHU05Z User Manual

Loading ...

13 ENGLISH

19. Attachthechipreceivertothetoolbytightening

fourscrews(forGHU04)orvescrews(forGHU05).

For GHU04

Fig.26

►1. Chip receiver 2. Screw

For GHU05

Fig.27

►1. Chip receiver 2. Screw

NOTICE: If the shear blades do not move

smoothly, the shear blades are not engaged with

the rods properly. Install the shear blades again.

NOTICE: If the parts other than the shear

blades such as the rods are worn out, ask Makita

Authorized Service Centers for parts replacement

or repairs.

Removing or installing the chip

receiver

CAUTION: When installing or removing the

chip receiver, always wear gloves so that your

hands do not directly contact the shear blades.

The chip receiver gathers discarded leaves and makes

clean-up afterward much easier.

To remove the chip receiver, remove four screws (for

GHU04)orvescrews(forGHU05),andthenremove

the chip receiver from the tool. To install the chip

receiver, follow the removal procedure in reverse.

For GHU04

Fig.28

►1. Chip receiver 2. Screw

For GHU05

Fig.29

►1. Chip receiver 2. Screw

OPERATION

WARNING: Keep hands away from shear

blades.

CAUTION: Avoid operating the tool in very

hot weather as much as practicable. When operat-

ing the tool, be careful of your physical condition.

CAUTION: Be careful not to accidentally

contact a metal fence or other hard objects while

trimming.Theshearbladesmaybreakandcause

aninjury.

CAUTION: Be careful not to allow the shear

blades to contact the ground.Thetoolmayrecoil

andcauseaninjury.

CAUTION: Overreaching with a hedge trim-

mer, particularly from a ladder, is extremely

dangerous.Donotworkwhilestandingonanything

wobblyorinrm.

Loading ...

Makita GHU05Z 40V max XGT Brushless Cordless 30" Single‑Sided Hedge Trimmer, Tool Only

User Manual - Page 13