Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/72146018_ghu04m1/bgb.png)
11 ENGLISH
8. Aligntheprotrusionsontheshearbladesvertically
at the same position.
1
Fig.16
►1. Protrusion
9. Insert the screw removed in step 5 into the holes
onthebladecoverandtheshearbladestotemporarily
xtheshearblades,andthenattachthefeltpadtothe
shear blades.
1
2
3
Fig.17
►1. Screw 2. Felt pad 3. Hole
10. Insert the protrusion on the shear blades to the
hole on the rod, then align the position of the felt pad
with the holes on the tool. Attach two new sleeves.
12
3
4
Fig.18
►1. Felt pad 2. Protrusion 3. Hole 4. Sleeve
NOTICE: Apply a small amount of grease to the
inner periphery of the hole of the rod.
NOTICE: Be careful not to lose the sleeves.
11. Align the holes on the sleeves and shear blades
with the holes on the tool, and then tighten two screws
totemporarilyxtheshearblades.
1
Fig.19
►1. Screw
Loading ...
Loading ...
Loading ...