Loading ...
Loading ...
Loading ...
Issue
The device
does not
Power ON
The Power Cord is not plugged into a power outlet:
• Connect the Power Cord to a power outlet properly.
Possible cause and solution
The vibration machine will not enter standby mode:
• Make sure that the power switch (8) on the device is
switched ON
The machine is over-heating due to long working hours:
• Turn off the machine, cut off the circuit and let the
equipment cool down.
Try turning ON the machine after a while
Cleaning Steps
1. Before cleaning the device, make sure that the Power Switch is o and that
the Power Cord is unplugged from the outlet.
2. Wipe the device with a slightly damp cloth.
3. After cleaning, be sure to dry the device thoroughly to ensure that the device
is completely dry before use.
Storage
If you are not using the device for a long time, put it in its packaging box and
store the box in a cool, dry place. Remove the batteries from the remote
control.
• Be sure to store this device in a dry environment.
• You can place the tness handle (8) in the storage boxes on the left and right
sides of the display (1) of the machine.
When storing this device, please don't:
• Make the device violently collide
• Make the device fall from a height
• Keep the device in a dusty environment
• Store the device in a humid environment
• Place the device directly in direct sunlight
• Store the device in extremely high temperature environments
• When storing the device, care should be taken to keep the device out of the
reach of children and securely locked. The storage environment temperature is
between 5-20 degrees Celsius.
TROUBLESHOOTING
www.SQUATZ.com
30
Loading ...
Loading ...