Loading ...
Loading ...
Loading ...
- 9
Release emergency-stop button by
turning.
Release the trigger of the jet pistol.
During breaks in operation, you can
insert the jet pistol on the holder on
the machine.
NOTICE
During longer service interruptions, the
dry ice pellets can agglutinate in the
dry ice container. As far as possible, do
not interrupt operations for more than
20 minutes. In case of extended inter-
ruptions, empty the dry ice container.
A water separator cleans the com-
pressed air flowing to the device. This
collects condensate in the water sepa-
rator, that needs to be drained once in
a while.
Place the collection trough under
the condensate drain screw.
Open the pressure relief valve
slowly and wait until the conden-
sate has been drained from the de-
vice.
NOTICE
Please dispose of condensate in an
environmentally friendly manner.
Set the appliance switch to "I".
Press the Statistics key briefly to
display the operating duration.
t: Operation duration since the last
reset.
T: Total operating duration.
Press the Statistics key briefly to
display the processed dry ice
amount.
m: Dry ice volume since the last re-
set.
M: Total dry ice volume.
Press the Statistics key briefly to
display the average dry ice con-
sumption.
q: Average dry ice consumption
since the last reset.
Q: Average total dry ice consump-
tion.
Turn the keyswitch in a clockwise
direction.
Press the statistics key for 4 sec-
onds.
NOTICE
The total values cannot be erased.
Press the keys to increase and de-
crease the jet pressure at the same
time and hold them, turn the key-
switch clockwise.
In the operating mode basic settings,
the keys have the following functions:
1 Increase value
2 Decrease value
3 Menu point to the top
4 Menu point to the bottom
Turn the keyswitch counter-clock-
wise.
DANGER
Risk of cold burns. Dry ice has a tem-
perature of -79 °C. Never touch dry ice
or cold parts of the machine without
appropriate protection. Wear protec-
tive gloves and protective overalls.
DANGER
Risk of injury on account of flying dry
ice pellets. Do not direct the jet pistol
on persons. Keep third persons away
from the place of use and when the
machine is being operated (by cordon-
ing off the area).
Close the compressed air supply.
Place the collection trough under
the condensate drain screw.
Open the pressure relief valve
slowly and wait until the conden-
sate and the compressed air have
been drained from the device.
Place the collection trough under
the dry ice exit.
Press the key to empty the dry ice
and wait until the dry ice container
is empty.
The dry ice emptying stops after the
preset time has elapsed (see "Basic
Settings").
If needed, press the key to empty
the dry ice container several times.
NOTICE
Please dispose of condensate in an
environmentally friendly manner.
Set the appliance switch to "0/
OFF“.
Disconnect the machine from the
compressed air inlet.
Disconnect the main plug from the
socket.
Clean and roll up the grounding
rope.
Dispose of blasting debris accord-
ing to applicable regulations.
DANGER
Risk of accident on account of dry ice
residue in the device. Remove all trac-
es of dry ice before transporting the de-
vice in closed vehicle; otherwise there
is a risk of carbon dioxide suffocation
to the co-passengers.
Carry out all the steps listed in the
chapter "Shut down" before trans-
porting the device.
Mount the appliance on the trans-
port vehicle.
Lock the breaks of the steering roll-
ers.
Fasten the device to the vehicle us-
ing fastening belts.
몇 CAUTION
Risk of injury and damage! Note the
weight of the appliance in case of stor-
age.
This appliance must only be stored in
interior rooms.
Switching on after emergency-
stop
Interrupting operation
Drain off the condensate.
Statistics functions
Retrieving values
Reset values
Basic settings
Menue point
Setting
range
Description
Soft start
0, 1, 2, 3,
4, 5 sec-
onds
Soft start, duration until
the selected jet pres-
sure is reached
T_Dump
1, 2, 3, 4,
5 minutes
Duration of the dry ice
emptying process
Language
metric,
imperial
Measurement units
metric: kg/h, MPa
imperial: lbs, psi
Lighting
ON/OFF Switch the nozzle light-
ing (option) on/off
Demo mode
ON/OFF Demo mode: The op-
eration is simulated,
compressed air and
dry ice dispensing is
locked.
Finish the basic settings
Shutting down
TRANSPORT
Storing the device
11EN
Loading ...
Loading ...
Loading ...