Loading ...
Loading ...
Loading ...
7 — English
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
ATTACHING THE HANDLE ASSEMBLY
See Figure 2.
Remove the battery pack if installed.
Locate and align the holes on the handle assembly with
the screw indentions on the edger assembly.
NOTE: Make sure the holes and indentions are aligned
for proper positioning of the pivoting handle.
Insert the handle assembly into the edger assembly.
Insert the two screws provided to connect the shafts as
shown.
Secure the cable clips onto the shaft. Insert cables into
the clips.
NOTE: Be careful not to bend, twist or pinch cables.
NOTE: If the handle is rotated 90 degrees, press the pivot
handle button to return the handle to it's normal operating
position.
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Edger
Handle assembly
Screws (2)
Blade wrench
Wire clips (2)
Operator’s Manual
Loading ...
Loading ...
Loading ...