Loading ...
Loading ...
Quick Starter Guide Page 3/11
1
Check if mouth piece seal (B) is mounted to the filter
outlet (A).
2
Use the included drill bit to make a hole in your
upper bucket and into the lid of the lower container.
Make sure that the hole is placed in the middle.
1. Place the included template in the middle of
the bucket bottom and drill a hole, diameter
14 mm.
2. Place the upper bucket on the lid of the lower
bucket and mark the position for the hole.
3. Drill a hole in the lid, diameter 14 mm.
3
Push the filter outlet through the bottom of the upper
bucket and the lid of the lower container.
Fix the filter by screwing on the filter nut (C).
Please note: If the filter element is dropped, check
for cracks in the ceramic. If there are any cracks,
clean the filter element with the abrasive cleaning
paper (see section Maintenance). If the cracks are
still visible after cleaning, the filter element is not
safe to use and needs to be disposed of.
Use the included drill bit (K).
Assembling the Filter Kit
Loading ...
Loading ...
Loading ...